synthesis tool for systemc

hello
I wish you could recommend a synthsis tool for systemC.
It will be really wonderful if the tool is free for download.
I know "Colexica" and "cocentric" ,but never use them.
Who can give me some tips of these tools.
Thanks

You can use sc2v to translate your SystemC code to a Verilog equivalent 
one and then synthesize it with a commercial Verilog synthesis tool.
Sc2v is freely available at www.opensocdesign.com

Regards

Javier Castillo
jcastillo@opensocdesign.com


"Chinix" <qinxi@mail.csdn.net> wrote in news:1109590758.827243.293030
@f14g2000cwb.googlegroups.com:

> hello
> I wish you could recommend a synthsis tool for systemC.
> It will be really wonderful if the tool is free for download.
> I know "Colexica" and "cocentric" ,but never use them.
> Who can give me some tips of these tools.
> Thanks
> 
> 

Hi I downloas sc2v and i installed yacc and lex but i don't know what to do and how to realize the conversion .. Could anyone help me please??

On Thu, 07 May 2015 00:15:47 -0500, princesse91 wrote:

> Hi I downloas sc2v and i installed yacc and lex but i don't know what to
> do and how to realize the conversion .. Could anyone help me please??

If it needs yacc and lex then it sounds like what you have is the source 
code for the application.  You either need to build the application, find 
a binary that'll work, or run away screaming.

If you just want it to work and if there's no binaries available, that's a 
sign to run away screaming.

-- 

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Dne =C4=8Detrtek, 07. maj 2015 07.15.51 UTC+2 je oseba princesse91 napisala=
:
> Hi I downloas sc2v and i installed yacc and lex but i don't know what to =
do and how to realize the conversion .. Could anyone help me please??

in Ubuntu 15.04 I was able to compile sc2v after installing packages flex a=
nd bison (command: sudo apt-get install flex bison). Then you have to compi=
le the source, which creates three executables in bin folder (sc2v_step1, s=
c2v_step2 ans sc2v_step3). A conversion from SystemC to Verilog can then be=
 done by calling the sc2.sh (e.g.: ./sc2v.sh ../examples/sc_ex1).

Hope it help
Jan

On Fri, 08 May 2015 12:34:24 -0700, jancooo wrote:

> Dne četrtek, 07. maj 2015 07.15.51 UTC+2 je oseba princesse91 napisala:
>> Hi I downloas sc2v and i installed yacc and lex but i don't know what
>> to do and how to realize the conversion .. Could anyone help me
>> please??
> 
> in Ubuntu 15.04 I was able to compile sc2v after installing packages
> flex and bison (command: sudo apt-get install flex bison). Then you have
> to compile the source, which creates three executables in bin folder
> (sc2v_step1, sc2v_step2 ans sc2v_step3). A conversion from SystemC to
> Verilog can then be done by calling the sc2.sh (e.g.: ./sc2v.sh
> ../examples/sc_ex1).
> 
> Hope it help Jan


It occurs to me that if Princess is using Windows then things just won't 
work right.

In which case he/she/it should probably build under Cygwin, unless he/she/
it wishes to learn a lot more about making things work in a dual-build 
environment than may be sane.

-- 

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com