Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
ISE
Comp.Arch.FPGA is a worldwide Usenet news group that is used to discuss various aspects of Field Programmable Gate Array (FPGA) based computing systems development.
We found 3449 threads matching "ise"
You are looking at page 1 of 87.
The most relevant threads are listed first
does ISE 6.3 improve timing vs. ISE 6.2 ?
Nahum Barnea - 2004-10-04 04:09:00
Hi.
I am using ISE 6.2 for xc2vp30,-6 that compiles for 100 MHz.
Now I am trying to stretch the design to 133 MHz.
Can anyone compare the performance improvement of ISE 6.3 vs. ISE 6.2 (if any) ?
THANKX
...
problem with ISE versions
nezhate - 2006-03-01 12:31:00
Hi all, I want to use a small cricuit (written in verilog and was
designed using ISE 3) in an other project using ISE 8.1. the problem is
that under ISE 3 the circuit worked perfectly, and under ISE 8.1 the is
an error. why this occur ?
...ISE 6.2i strange behavior
sjulhes - 2005-11-16 08:51:00
Hi !
I installed ISE and EDK 6.2i with SP3, and ISE as a stange behavior.
When I go through steps synthesis, P&R and .bit generation every thing is
ok.
If I launch impact or if I swap to another windows application and back to
ISE, all green marks go back to ? and ISE launches the wholel flow...Ise foundation and Ise Webpack
Pablo - 2007-03-05 11:04:00
Hi, does anyone know the difference between Ise Foundation and Ise
Webpack?. I have Ise Webpack installed in my PC and now I have some
software which needs Ise Foundation and I don`t know if there is some
difference.
Although I have to install Xilinx System Generator. Is it on Ise
Foundation?...ISE BaseX customers
=?iso-8859-1?B?R2FMYUt0SWtVc5k=?= - 2006-01-21 08:35:00
I read from the file
http://www.xilinx.com/company/press/kits/ise81i/8_1i_faq.pdf the
following:
--BEGIN--
14. What happened to the ISE BaseX configuration?
.... skipped text ....
All in-maintenance ISE BaseX customers are receiving a copy of ISE
Foundation at no extra cost with the ISE 8.1...Using EDK libraries in ISE
Harish - 2004-12-23 20:34:00
Hello all,
How can we simulate the EDK IP cores in ISE? I created a new project in
ISE and copied the vhdl files that comes with EDK onto a new file and
tried to synthesize it. However the synthesis failed as the library
referred to in the design was not seen by ISE. Can anyone tell me how
t...ISE does not initialize the bitstream of a EDK project
Francis - 2005-09-30 17:16:00
I have a project EDK system.xmp in ISE. ISE does not initialize the
bitstream even if I do a update bitstream in ISE. I had to import ISE to
EDK and do update bitstream so that it works on my FPGA board. Looks
like EDK does it correctly and not ISE. I also tried to use my project
in ISE wi...ISE does not initialize the bitstream of a EDK project
Francis St-Pierre - 2005-09-30 17:16:00
I have a project EDK system.xmp in ISE. ISE does not initialize the
bitstream even if I do a update bitstream in ISE. I had to import ISE to
EDK and do update bitstream so that it works on my FPGA board. Looks
like EDK does it correctly and not ISE. I also tried to use my project
in ISE wi...edn macro in ISE
Yaseen Zaidi - 2005-06-29 14:18:00
I like to use a Xilinx written macro (edn) in my design using ISE 6.3.
I seems ISE does not accept edn file. I could not find any
documentation on using edn netlist for ISE. It follows the macro is
little old and older foundation had provision where edn elements could
be instantiated. However, I...ISE 7.1 WebPack + EDK 6.3
Peter Særensen - 2005-03-17 17:38:00
Hi,
Im a poor student who purchased the 6.3 version of the EDK a few months back. Uptill now I have been using the evaluation version of ISE 6.3 (too expensive for me). I have been unable to use the WebPack version of the ISE 6.3 since "all" I have is a Virtex4 LX25. I had been planning to switch...xilinx ise 8.1 mig 1.4 /1.5
guy - 2006-02-13 12:36:00
hello
the ise7.1 had the mig1.4 for memory interface generator
does it work on the ise 8.1?
if not is there any newer version for ise 8.1?
thanks
guy
...Using a different editor for ISE 5
Theron Hicks - 2003-09-03 09:08:00
Hello,
Is there a way that I can (within ISE 5) use a different editor? I want
the editor to be integrated into the ISE system but I want to use a
different editor. The feature that I most want is automatic formating of
indents, etc. ISE does a good job, but if I screw up when I put in a ...Using EDK libraries in ISE
Harish - 2004-12-23 20:40:00
Hello all,
How can we simulate the EDK IP cores in ISE? I created a new project in
ISE and copied the vhdl files that comes with EDK onto a new file and
tried to synthesize it. However the synthesis failed as the library
referred to in the design was not seen by ISE. I'm trying to synthesize
...How to open an ISE 8.1 project in ISE 7.1?
Rainier - 2006-05-03 04:05:00
I want to open an ISE 8.1 project in ISE 7.1, but it seems impossible.
and there's even no compatibility property in the save option.
My project has verilog, vhdl, schematic and coregen files.
thanks.
...ISE 8.1 release delayed?
Antti Lukats - 2005-12-05 13:25:00
ISE 8.1 release was planned for mid nov, now its mid december soon, I wonder
if it is known how much more the ISE 8.1 release is delaying? Xilinx is
advertising ISE webcast on Dec 14, I wonder if that will only cover soon to
be obsoleted 7.1 or be focused on 8.1?
Actually I am more waiting ...Nondeterministic ISE Placement
Tom - 2005-05-23 11:54:00
I remember a few years ago we would have to run ISE PAR several times
in order to meet timing. One we had a decent layout, we would lock it
down because of the chance of never being able to reproduce it.
Does ISE still suffer nondeterministic placement?
Also, how much has ISE PAR improv...Install two version of EDK/ISE (8.1, 8.2) in my windows xp?
Pablo - 2007-06-06 03:47:00
Is it possible to install two diferent versions of EDK/ISE, that is,
one EDK/ISE 8.1 and another EDK/ISE 8.2. The reson is that I need the
first one for simulink, but my custom board uses the second one (for
the drivers). I suppose that the problem is the "Path Variable".
Has anyone some exper...most stable version of ISE ?
Mike Harrison - 2011-10-03 06:24:00
I've seen lots of messages a while ago about how ISE is going downhill...
Which version of ISE would people recommend for fairly simple VHDL projects using Spartan-3 and
Spartan-6?
I'm currently developing with an old S3A prototype board, with a view to change to S6 for the next
iteration.
I...Using Spartan XL w/ modern ISE
Vadim Vaynerman - 2004-12-04 13:42:00
Hi all,
I am wondering if there is any way to use my legacy Spartan XL devices with ISE/WebPack as the front end. Is there anything I can do, or would I have to fall back to the old ISE Classic/LeonardoSpectrum routine?
Thanks, Vadim
...Fastest ISE Compile PC?
marc_ely - 2006-10-19 07:24:00
Has anyone recently done any benchmarking of Windows PC's for Xilinx
ISE Compiles?
Is ISE multithreaded?
Can it use multiple processors (or cores)?
Do big CPU caches help?
Regards
Marc
P4-3GHz HT 2GB DDR2-533 RAM
...Xilinx Ise 6.3i
Pablo - 2007-03-06 04:48:00
Hello, does anybody know how can I get xilinx ise 6.3i? I have
installed ise v8.1i, but know in my organization I need to install ise
v6.3i.
Thanks
...ISE Smart Ident
mans - 2007-04-18 05:38:00
Hello,
Is there any facility in ISE to automatically indent source code? The
similar technique is available in C/C++ editors and I it is very simple to
add it to ISE for indenting smartly VHDL and Verilog source codes.
Regards
...Tool to convert ISE project into makefile? (for Linux)
Wojciech Zabolotny - 2007-03-25 12:04:00
Hi All,
I'm looking for a tool, or a method to convert the ISE project into a
makefile, which I could run remotely without X connection.
The only thing I've foond is: http://www.xess.com/appnotes/makefile.html
However I don't now if it works with ISE 9.1.
Could anybody share some experiences...ISE 9.1 SAY YOURS OPINION
Francesco - 2007-02-02 09:50:00
Hi, I'm just wondering how many people here are using ISE 9.1.
Could you post your experience here?
Antii what do you think?
Is really 6 time faster?
I tryed unsuccesfully to use ISE 9.1 SP1...unfortunately in my case
the tool crashed with the message error: "Runtime error"
I tryed a few tim...ISE 10.1 Free Downlaod Web Install
john - 2009-06-11 15:24:00
Hi All,
I am trying to install ISE webpack 10.1 webinstall on my machine. I
have Vista Business 64 bit OS. I dowloaded and saved the file on my
drive and execute the setup file. I entered the Product ID but the
installation program is only showing the ISE programming tool option
active not th...ISE 7.1 small advice about project files (.ISE extension)
Antti Lukats - 2005-05-27 02:45:00
Hi
just a little thing: starting from 7.1 ISE abondoned the use of plain text
project files, the new project files with .ISE extension are PKZIP
compressed - that can cause an additional problem if ISE is not closed
correctly as the ZIP archive could corrupted rendering it totally useless,
IS...New modelsim PE student edition 6.2g and Xilinx ISE 9.1i User Linking problems
2007-03-03 00:55:00
I am using these programs in my digital class but do not know how to
link modelsim to ISE. In our school lab, after I make my schematic, I
can run model sim to simulate it from inside ISE. Does someone know
how I would set this up?
...ISE 11.5 to ISE 12.3 migration problem
Rajeev - 2010-12-14 10:50:00
I have a fully debugged design in ISE 11.3 and now having trouble getting
it to work in ISE 12.3. With XST option "Keep Hierarchy" unchecked, all my
input ports other than âclockâ are REMOVED during optimization.
However, with "Keep Hierarchy" option turned on, the problem goes away and
all the ...ISE 11.1 still no MP support :(
luudee - 2009-04-22 04:35:00
ISE 11.1 still no MP support :(
Just installed and run ISE 11.1. To my disappointment, there
is still no MP Support, and compile time are equivalent to 10.x.x ...
Anybody knows if Xilinx will ever add MP support ?
But the gui is a bit nicer ....
Cheers,
rudi
...ISE On Intel Mac
Joseph Samson - 2006-10-16 17:53:00
Is anyone running ISE on an Intel based Macintosh? I'm considering a
MacPro with dual Core 2 Duo processors, running ISE on XP Pro.
---
Joe Samson
Pixel Velocity
...ise 6.2 lvdci_33
Matthias =?iso-8859-1?Q?M=FCller?= - 2004-05-27 06:05:00
Hello,
it looks like ISE 6.2 doesn't accept LVDCI_33 buffer for Virtex 2 Pro
devices. I have only 3,3V banks with an XC2VP7. What happens if I
instantiate LVDCI_25 buffer, which are accepted by ISE 6.2?
Greetings,
Matthias
...Progress bar in ISE 8.1
Fred - 2006-03-19 09:01:00
It was there in ISE 7.1 but now I've upgraded to ISE 8.1 SP2 and it's gone.
What's happened to it?
It's even more difficult to tell if a compilation has finished or found an
error.
Why can't there be an audible warning that a compilation has finished?
...Personalization of Xilinx ISE
=?iso-8859-1?B?R2FMYUt0SWtVc5k=?= - 2006-05-30 01:47:00
Hi all, Is there a method for personalization of ISE?
One of the personalizations:
- For avoiding students to make errors in IOB proprties in UCF
files (the student's projects are for S3-Starter kit): is it possible
to add some step in the translate phase? I saw a perl interpreter
install...design flow xilinx ise 7.1+synplify pro8.4
prakash.na@gmail.com - 2006-04-05 13:05:00
Hi,
While porting hdl codes in xilinx, I synthesized using synplify with my
constraints.Then I place& routed in xilinx-ISE the edif file (output
of synplify). Now there are some timing errors coming in ise. Now I
want to view the P&R 'ed file in synplify, which file I 've to load it
in synplif...Can ISE 4.2 program Virtex 2 6000K devices?
Frank - 2005-12-14 04:14:00
Just got the old PC from the storage of the lab which has ISE 4.2 installed.
I only need the PC to program Virtex 6000 and xc18v04, do I need to upgrade
to ISE 6 or above?
Thank you.
...Spartan 3 Starter Kit and ISE WebPACK
Kroko - 2004-09-01 16:32:00
I am planning to purchase a Spartan 3 starter kit.
It says:
XC3S200-4FT256C included
ISE Evaluation version 6.2i
Can I build a complete VHDL design for the XC3S200
with free software (ISE Web Pack?) or do I have to
purchase ISE BaseX or some other expensive software
for hundreds of d...ISE 8.2 and partitions from command line
Andreas Ehliar - 2006-10-06 08:34:00
I'm trying to figure out if it is possible to use partitions
using either command line flow (I want to integrate it into a
Makefile environment) or at least using xflow.
So far I have come to the conclusion that there is no documentation
at all on how to use it outside of Project Navigator. So...xilinx ise / update schematics
walter zabel - 2005-09-12 09:22:00
have archived my project manually (without using ise) and restored it. now, ecs tells me to update every macro instance. when i do so (option: update all schematic files)ise is getting very, very slow. i tried to exit and restart but it will not solve the problem...
it happens both on 6.1.03i and...ISE WebPack 8.1i
=?iso-8859-1?B?R2FMYUt0SWtVc5k=?= - 2005-12-13 19:01:00
Hi all!
Does anybody knows why the Xilinx ISE Foundation 8.1i is already
released but not the ISE WebPack 8.1i ?
Mehdi
...Virtex4 Block Ram : ISE6.3 Problem
Luke Darnell - 2005-05-22 20:11:00
We have just bought a new Virtex4 based devleopment board, but were having alot of trouble with the on-chip block RAM. This same design run successfully on a Virtex2 board. We were running ISE 6.3.
We just got ISE 7.1 and our problems have gone away. Just a warning to any who might be having prob...