Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
Linux
Comp.Arch.FPGA is a worldwide Usenet news group that is used to discuss various aspects of Field Programmable Gate Array (FPGA) based computing systems development.
We found 1280 threads matching "linux"
You are looking at page 1 of 32.
The most relevant threads are listed first
Actel Designer on Linux
Neill A - 2005-05-19 03:06:00
Does anyone have any experience of running Actel Designer on Linux?
We currently use WinXP, and have recently been informed that if we used
Linux, then Designer would run 10x faster. I would just like to see if
anyone out there can confirm this before trying to get a machine set up
with Linux...
Xilinx tools on Linux
David - 2005-04-16 02:56:00
There are ISE Foundation and ISE Webpack versions for Red Hat Enterprise
Linux 3.0 How strict is this port? Has anybody managed to run these
tools on Fedora or Mandrake Linux (now Mandriva), or any other Linux
variant? If so, how well did it work?
...Xilinx in Linux
ted - 2004-08-24 10:15:00
Hi,
Does anyone know if it's possible to run the Xilinx ISE 4.2i software in
Linux? I would like to develop VHDL code and then program my FPGA (I use a
parallel port JTAG programmer). Being able to do this from Linux would make
the project easier as I need to develop a Linux device driver at...ISE and BaseX for Linux?
Pepper Orlando - 2004-09-21 10:06:00
Though I will be using the webpack that ships with the Spartan-3
intially, I am somewhat interested in the Linux version of BaseX or
Linux that I've been reading about. With version 6.3, is the Linux
version now native (not WINE)? Also, does it provide all of the
features of the Windows version?...program spartan3 under linux
Thorsten Kiefer - 2009-08-27 17:51:00
Hi,
I'm using the Xilinx Webpack 11.1, the Spartan3 StarterKit, and the Digilent
USB/JTAG cable.
I find ISE 11.1 too slow under Windows, so I want to use it with Linux.
My question is : is it possible to program the FPGA under Linux ?
Xilprg is too old. Export from digilent is discontinued and...Re: Quartus II 7.2 web edition - Linux or not?
Eric Smith - 2007-10-15 21:10:00
Kees Bakker writes:
> Wine??? There are very, very few applications that actually work under Wine.
> And of those, the majority is of no interest for Linux users, because there
> are perfect alternatives which are native Linux.
Linear Technology LTSpice (also known as SwitcherCAD) works ...Linux on ml403
jfh - 2006-03-27 01:21:00
Hi,
I have been trying to port Linux on the ML403 board using the 2.4 devel
tree downloaded from montavista site using rsync.The compilation goes
fine with the modifications of some source files and makefiles after
copying the BSP generated from EDK 7.1 (I used some BYU website advice
about p...opb master kills linux?
Anonymous - 2006-11-27 17:26:00
I have a xilinx v4 project running mv linux 2.6.10. I have a custom
peripheral I made that includes DMA on the opb bus and is therefore
master/slave. The SDRAM that the linux .elf file loads to/boots from is also
on the opb. Unless I disconnect the custom peripheral linux dies at
"uncompressing ...Applications under MontaVista Linux on ML310
JD Newcomb - 2007-02-09 10:16:00
Greetings!
I have a question regarding applications running on embedded Linux on
an ML310. Getting things to work under standalone has been fairly easy
with my custom hardware (just a little pulse counter generating
interrupts on each pulse, in Verilog). I want to make a jump to
running this ...Linux and FPGA compatibility
Michelle - 2003-11-05 12:41:00
Hi,
I'm a newbie to FPGA and Linux world. I have a general question
concerning both.
I have a workstation with Linux installed. A Virtex II Pro FPGA Module
is plugged in the backplane of the workstation. I'm wondering if I
need to write a device driver for the FPGA module in order for the
...CPLD/FPGA with Linux
Scorpiion - 2009-10-22 12:01:00
Hi, I have just started out with some VHDL in school and would like to have
something at home to play with. I'm not sure of CPLD vs FPGA for my use,
but CPLD feel more suited for smaller projects I guess. My question is how
Linux is supported as developmentplatform? (I have linux on my computers at
...Avnet Virtex II Pro Dvpt board : linux drivers ??
Mancini Stephane - 2003-12-23 04:18:00
Hi,
Please could you tell me if there's a linux driver of the Virtex II Pro
development board from Avnet (Silica) ?
I would like to know if there's an equivalent to the PCIUtility for Linux.
Indeed, I would like to have my workstation with linux and work with the
board directly through the pci ...Re: comp.arch.fpga.
Symon - 2005-06-20 05:17:00
Bob,
Now you're talking! How about
.good-book-about
.i-cant-get-linux-to-work-with.impact
.i-cant-get-linux-to-work-with.ise
.i-cant-get-linux-to-work-with.edk
.i-cant-get-linux-to-work-with.anything
.i-cant-get-any.spartan3
.i-cant-get-any.virtex4
.i-cant-get-any.satisfaction
To hel...Altera Byte Blaster Cable on Linux
B. Joshua Rosen - 2007-02-28 13:54:00
I'm trying to use the Altera USB Byte Blaster Cable on Linux (Scientific
Linux 4.4, i.e. RHEL 4). The Programmer application sees the cable,
however it says there are insufficient privileges on the port. I've tried
running Quartus as root, that didn't fix the problem. There is no Firewall
and Se...Regarding Linux on ML 310
beeraka@gmail.com - 2005-03-04 23:29:00
Hi Everyone,
I wanted to load linux (Montavista ) on a partition in the
Compact Flash ..and wanted to run my program after linux gets
loaded..When I see the Xilinx Linux tutorial for the ML 310..I came to
know that the two important things are -- ml310_base_bootloop.bit
(which has ...Linux 2.6 for PPC on Xilinx XUP-V2PRO board!
Ams - 2006-06-09 05:37:00
Hello,
After spending sometime hunting on the web... there is very little
information if nothing at all on compiling a 2.6 linux kernel for the
XUP-V2PRO or the ML3XX variants. I am currently trying to compile 2.6
for my XUP-V2PRO with the following requirements:
1. Ethernet support,
2. G...Xilinx + ModelSim XE Linux
Tim McCoy - 2005-06-05 20:37:00
Hi all,
I'm happy to see Xilinx is releasing their WebPack for Linux, and with a
couple of minor tweaks, it actually works on everyday versions of Linux
like Debian.
Problem is, its missing the simulation and verfication tools shipped with
the Windows version. I'm namely thinking about Mode...quartus - Linux or Windows
nachum - 2005-02-09 08:36:00
I have read that quartus is optimized to take advantage of the SSE
instruction sets in Linux, yet not in Windows. Can I assume from this
that quartus will run faster on Linux?
I am buying a new computer, and I want to decide what OS to run, and if
Linux will be faster for FPGA design, than tha...Configuring Impact on any version of linux
Ankit - 2007-09-22 06:02:00
Hi guys i want to use Xilinx 8.2i or 9.1i or even 7.1i for burning
codes on my FPGA board using the Parallel port on Linux..The linux
which i have are Fedora Core 6,Ubuntu and Open Suse 10.2..I have been
able to install Xilinx on all of them but till now i have not been
able to configure Impact....ISE under 64-bit Linux?
Phil Tomson - 2006-04-04 13:54:00
Just got an Athlon64 system. I want to be able to run the Xilinx ISE tool
suite on this box under Linux. I'd also like to install a 64-bit Linux on it -
are there any issues with running xst under 64-bit linux? I suspect there
might be driver issues with downloading bitstreams, but I'm thin...best evm for virtex-4 and linux
Anonymous - 2006-01-11 10:47:00
Can anyone suggest the best evm board for virtex-4 and linux? How has
people's experience been with it? Are USB drivers included in the linux os
builds they provide?
Thanks,
Clark
...Installing FPGA Advantage on Linux machine
fad - 2005-11-09 01:54:00
Does anyone know the process of installing FPGA Adv on Linux based
system? Does FPGA Adv be have Linux support or not?
I have to install modelsim and leonardo spectrum on linux machine
separately as well. please suggest if anybody has already done the
process.
Regards,
Fahad
...Linux and the Digilent Basys ?
Bob Smith - 2008-02-16 13:08:00
I work for a Linux software house and would like to offer a
"Hello, World!" tutorial for FPGAs. The idea is to keep it
simple and low cost. The Digilent Basys board looks good
for cost but not for (Linux) simplicity. I'd sure like to
avoid the windrv module and the parallel port cable.
Doe...linux on memec fx12 mini-module?
Anonymous - 2006-03-24 11:37:00
Does anybody know if/where a pre-made linux build for the memec v4 fx12
mini-module development kit? PPC linux preferred but microblaze is fine too.
I'm just doing software evaluation and measuring power consumption so any
linux is fine. I'm not interest in the source files now, just what ever
p...Montavista linux Xilinx Virtex4 ML403
tester - 2006-06-27 10:19:00
I have a monta vista linux preview kit 3.1 runnig on a ml403 GSRD based
design. Now i have the problem to get the linux runnig out of the
compact flash card from Systemace on ML403. Who has as solution for that
...Quartus for linux
lbroto - 2004-04-07 08:08:00
Hi !
I'm lookink for a quartus web edition for Linux.
I read some news but I don't manage to find if a such version exist.
If it exists, where can I download it ? ( on altera website, I see
quartus 4 bus this version doesn't work under linux).
Thank's a lot,
-- Laurent
...Xilinx XUP + Linux (firmware loading problem!)
S.T. - 2005-09-26 11:21:00
Hi
I have some more insights in the problem connecting a "xilinx xup virtex II
pro" board with linux: I just installed windows and ise71_4i and connected
the board. After *three* times driver installation the board worked. Then i
rebooted into linux and got impact running and identifying the c...Linux on Viretex-II pro
Eric - 2005-09-06 17:43:00
Hi,
I just got a board with a Viretex-II pro FPGA. I'm a newbie and have
several questions that would like to get some answers or suggestions.
We were planning on porting linux to the FPGA. What are the advantages
and disadvantages of porting linux to PPC and Microblaze? I have seen
works d...Cheking out Linux Kernel Source
Sewook Wee - 2005-07-06 17:00:00
Hello,
I am using VIIPro on ML310 board, and trying to port Linux on it.
While I was trying to check out the Linux Kernel Source using
BitKeeper(BK), it complained that BK is not free anymore.
Is there anyone who knows where can I get the kernel source?
The version that I need is v2.4.21.
...multi-processor linux on xilinx
Anonymous - 2006-02-04 12:00:00
Thanks for all the feedback recently on linux on Xilinx. I think I
understand it now:
PPC linux is faster and technically superior but monte vista has a strangle
hold on the source and tools which discourages anybody from using it.
uClinux/microblaze is slower but more open source and easier...development-tools under linux for altera excalibur
bakito - 2003-09-29 13:01:00
hi everyone,
i'm working on my diploma work right now. i have to develop an fpga -
circuit. the development-environment has to be linux redhat.
does anyone know fpga-developmenttools to write compile and link fpga
circuit under linux.
...Linux VHDL Simulator
Jim George - 2005-04-08 01:58:00
Hi all,
I'm working with ISE 6.3 under Windows right now, I'd like to use it
under Linux but I'm holding back because MXE will not work under Linux.
Any solutions? I will be using Suse 9.3 (when it's released). From the
simulator, I only need the ability to simulate my design with a
testb...License problems with Quartus 7.0 on Linux
General Schvantzkoph - 2007-05-07 12:46:00
I've been trying to use Quartus 7 on Linux (I've tried three different
RedHat/Clone distros, FC6, CentOS 5, Scientific Linux 4.4. The fitter is
getting a license failure,
Current license file does not support the EP2SGX90FF1508C4 device
Quartus 6.1 runs fine and my Altera FAE thinks my lic...CPLD design software under WINE?
Mika Leinonen - 2005-10-14 23:47:00
Have You got any experiences running design software for windowses under
WINE & Linux or plain Linux for X86 or other Linux? The devices I'd like
to design for are Lattice ispLSI1016/1032/E and Xilinx XC9572/XL.
...ISE 7.1i & Linux / reg code question
Ram - 2005-09-12 16:09:00
Hi,
I've read through the archives for notes and hints on installing ISE 7.1i
for Linux.
I got curl, portmap, motif, etc all installed. The installer now comes up.
However, when I enter in the Registration ID, it keeps telling me that it's
invalid.
Does ISE 7.1i use the same install c...X-HDL 2003
tel4@ath.forthnet.gr, tel2003@pathfinder.gr - 2003-11-04 00:32:00
X-HDL 2003
08/ 1/03 7| X-HDL V3.2.20 [xx/02]
19/ 1/03 6| X-HDL V3.2.21 (C) X-TEK CORPORATION
*LINUX* [xx/02]
19/ 1/03 6| X-HDL V3.2.21 (C) X-TEK CORPORATION
week 19/03 - 14
X-HDL V3.2.23 LINUX
week 22/03 - 14
X-HDL V3.2.25
X-HDL V3.2.25 LINUX
week 23/03 - 14
...WEBPACK for linux
beky4kr@gmail.com - 2008-10-02 14:35:00
A few years ago I downloaded the WEBPACK for linux.
I checked recently in http://www.xilinx.com/support/download/index.htm
and it seems the free version is only for windows.
Does xilinx stop to give it for free (the linux version).
...ISE and Linux
Marco - 2005-05-19 19:20:00
Does it function with every distribution of Linux?
There is a way to try the 64 bit version or I need to recompile everything
by myself?
Thanks
Marco
...No Synplify evaluation?
2007-04-17 08:31:00
Good afternoon..
Has anyone being lucky in the past getting a Synplify for Linux
evaluation license?
Mentor has some online feedback form to request an evaluation
license, but apparently their eimail goes always to /dev/null (o;
I received the ispLever for Linux including license from L...ANN: Linux friendly FPGA dev board
Bob Smith - 2009-01-09 02:04:00
Hi
I'd like to announce the availability of a Spartan 3E
FPGA development board that, while usable under Windows,
is particularly easy to use under Linux.
The reason for it's Linux friendliness is that it uses
standard USB-serial for downloads. It does not need or
use JTAG dongles or driv...