The Xilinx ML310 evaluation board has a set of
connectors
for high-speed interfaces using a Tyco Z-Dok+ interface (6.25Gps).

I've seen in some of the Xilinx brochures a proto board that mates
to these connectors. Does Xilinx provide this board, or is there
a third party that makes the personality module interface boards?

The adapter board connector is a Tyco part 1367555-1 which is
a Z-Dok+6 connector.

I've even seen reference to proto boards like on hitechglobal
that call out the HW-V2P-PM which is described as
"Virtex-II Pro ML310 Personality (Conversion) Modules"
But I can't see any place to order such a thing.

Anyone have any pointers?

I bought the ML310 board from Xilinx just
recently. I came across the same
question so I contacted Xilinx directly and asked them that very question.
As a result I got the information that they plan to develop and provide such
dedicated personality boards but haven't got them finished so far. The only
thing you can do right now is to get the counterpart of the tyco connector
and tinker your own adapter module. So did I! :-)

Regards, Quinn


"bh" <s...@nosuch.com> schrieb im Newsbeitrag
news:MhBjd.41669$f...@news4.srv.hcvlny.cv.net...
> The Xilinx ML310 evaluation board has a set of connectors
> for high-speed interfaces using a Tyco Z-Dok+ interface (6.25Gps).
>
> I've seen in some of the Xilinx brochures a proto board that mates
> to these connectors. Does Xilinx provide this board, or is there
> a third party that makes the personality module interface boards?
>
> The adapter board connector is a Tyco part 1367555-1 which is
> a Z-Dok+6 connector.
>
> I've even seen reference to proto boards like on hitechglobal
> that call out the HW-V2P-PM which is described as
> "Virtex-II Pro ML310 Personality (Conversion) Modules"
> But I can't see any place to order such a thing.
>
> Anyone have any pointers?
>
>