Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
Comp.Arch.FPGA | Using Spartan XL w/ modern ISE
There are 2 messages in this thread.
You are currently looking at messages 0 to 2.
Using Spartan XL w/ modern ISE - Vadim Vaynerman - 2004-12-04 13:42:00
Hi all, I am wondering if there is any way to use my legacy Spartan XL devices with ISE/WebPack as the front end. Is there anything I can do, or would I have to fall back to the old ISE Classic/LeonardoSpectrum routine? Thanks, Vadim
Re: Using Spartan XL w/ modern ISE - rickman - 2004-12-04 15:12:00
Vadim Vaynerman wrote: > > Hi all, > > I am wondering if there is any way to use my legacy Spartan XL devices with ISE/WebPack as the front end. Is there anything I can do, or would I have to fall back to the old ISE Classic/LeonardoSpectrum routine? Yup, you are stuck with the "classic" tools for this part. The Spartan (non II or 3) parts are based on the XC4000 family for which all support is dropped in the new tools. They only support the Virtex like devices and derivatives. -- Rick "rickman" Collins r...@XYarius.com Ignore the reply address. To email me use the above address with the XY removed. Arius - A Signal Processing Solutions Company Specializing in DSP and FPGA design URL http://www.arius.com 4 King Ave 301-682-7772 Voice Frederick, MD 21701-3110 301-682-7666 FAX______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.