Sign in

username:

password:



Not a member?

Search Comp.Arch.FPGA



Search tips

fpga by Keywords

Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST


Ads

See Also

DSPEmbedded SystemsElectronics

Comp.Arch.FPGA | Prototyping board with 4+ MB SRAM?

There are 4 messages in this thread.

You are currently looking at messages 0 to 4.

Prototyping board with 4+ MB SRAM? - 2003-11-04 04:40:00

Hello,

Does anyone happen to know of a stock FPGA prototyping board with (a)
onboard oscillator, (b) Ethernet and (c) at least 4 MB of SRAM?

I have a need for such a board in a configuration which needs to
support a very large range of input frequencies, hence I would prefer
using SRAM; however, most boards seem to have no more than 1 MB SRAM
and the rest SDRAM... which would have to be supported as an
asychronous clock domain in order to work correctly at the low end of
the frequency range.

	-hpa
-- 
<h...@transmeta.com> at work, <h...@zytor.com> in private!
If you send me mail in HTML format I will assume it's spam.
"Unix gives you enough rope to shoot yourself in the foot."
Architectures needed: ia64 m68k mips64 ppc ppc64 s390 s390x sh v850 x86-64
______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.



Re: Prototyping board with 4+ MB SRAM? - Philip Freidin - 2003-11-04 05:17:00

On 4 Nov 2003 01:40:27 -0800, H. Peter Anvin
<h...@zytor.com> wrote:
>Hello,
>
>Does anyone happen to know of a stock FPGA prototyping board with (a)
>onboard oscillator, (b) Ethernet and (c) at least 4 MB of SRAM?
>
>
>	-hpa

I would start looking here:

   http://www.fpga-faq.com/FPGA_Boards.shtml



===================
Philip Freidin
p...@fliptronics.com
Host for WWW.FPGA-FAQ.COM
______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.

Re: Prototyping board with 4+ MB SRAM? - Jon Beniston - 2003-11-04 14:26:00

H. Peter Anvin <h...@zytor.com> wrote in
message news:<bo7s6b$ddg$1...@cesium.transmeta.com>...
> Hello,
> 
> Does anyone happen to know of a stock FPGA prototyping board with (a)
> onboard oscillator, (b) Ethernet and (c) at least 4 MB of SRAM?
> 
> I have a need for such a board in a configuration which needs to
> support a very large range of input frequencies, hence I would prefer
> using SRAM; however, most boards seem to have no more than 1 MB SRAM
> and the rest SDRAM... which would have to be supported as an
> asychronous clock domain in order to work correctly at the low end of
> the frequency range.
> 
> 	-hpa

http://www.xess.com
______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.

Re: Prototyping board with 4+ MB SRAM? - Dave Vanden Bout - 2003-11-05 14:21:00

Jon Beniston wrote:

> H. Peter Anvin <h...@zytor.com> wrote in message
news:<bo7s6b$ddg$1...@cesium.transmeta.com>...
> > Hello,
> >
> > Does anyone happen to know of a stock FPGA prototyping board with (a)
> > onboard oscillator, (b) Ethernet and (c) at least 4 MB of SRAM?
> >
> > I have a need for such a board in a configuration which needs to
> > support a very large range of input frequencies, hence I would prefer
> > using SRAM; however, most boards seem to have no more than 1 MB SRAM
> > and the rest SDRAM... which would have to be supported as an
> > asychronous clock domain in order to work correctly at the low end of
> > the frequency range.
> >
> >       -hpa
>
> http://www.xess.com

Sorry to say XESS doesn't have any boards right now with this much SRAM.  We do have
boards
with 16 MB of SDRAM, but not SRAM.


--
|| Dr. Dave Van den Bout   XESS Corp.                 (919) 363-4695 ||
|| d...@xess.com           PO Box 33091                              ||
|| http://www.xess.com     Raleigh NC 27636 USA   FAX:(919) 367-2946 ||