Sign in

username:

password:



Not a member?

Search Comp.Arch.FPGA



Search tips

fpga by Keywords

Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST


Ads

See Also

DSPEmbedded SystemsElectronics

Comp.Arch.FPGA | Cannot use ML310 DDR

There are 4 messages in this thread.

You are currently looking at messages 0 to 4.

Cannot use ML310 DDR - king_azman - 2006-02-21 22:04:00

hi,

i'm trying to work with the ddr sdram on the ml310 development board. i
tried creating a simple base system with the ddr using  the bsb wizard.
i also changed the ucf file as in the sample file provided. however, i
keep getting 'memory test - failed" when running the generated memory
test program. can anybody help me?



Re: Cannot use ML310 DDR - beeraka@gmail.com - 2006-02-22 13:17:00

Hi ,
        I also had the same problem, but after i patched the UCF for
ml310_base_design.zip everything worked fine...
One of the questions that I have is where is your DDR (on the PLB or on
the OPB)..I have ours set up on the OPB and everything works fine...

        The other thing that I would recommend is to use one of the
designs from the web.
http://www.xilinx.com/products/boards/ml310/current/index.html and then
try it out before
you start using your own.

--
Parag

king_azman wrote:
> hi,
>
> i'm trying to work with the ddr sdram on the ml310 development board. i
> tried creating a simple base system with the ddr using  the bsb wizard.
> i also changed the ucf file as in the sample file provided. however, i
> keep getting 'memory test - failed" when running the generated memory
> test program. can anybody help me?
______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.

Re: Cannot use ML310 DDR - Stephen Craven - 2006-02-22 13:30:00

I've had similar problems with MicroBlaze designs
(not PPC).  I was
able to use the memory only after reseting the board after programming.

Stephen
______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.

Re: Cannot use ML310 DDR - king_azman - 2006-02-23 20:03:00

Hi..

Thanks for your input.

> I also had the same problem, but after i patched the UCF for
> ml310_base_design.zip everything worked fine...
> One of the questions that I have is where is your DDR (on the PLB or on
> the OPB)..I have ours set up on the OPB and everything works fine...

I've already patched the UCF (rewrite actually - coz I have different
net names).
I have it on my PLB - that might be the thing that I should try. But,
it shouldn't
be a problem right?

> I've had similar problems with MicroBlaze designs (not PPC).  I was
> able to use the memory only after reseting the board after programming.

Yupp.. it will show successful test for all 3(32-, 16- & 8-bit test)
after a few (not one)
reset - but still, it's not stable.. it still fail some tests (but not
all.

-k.az-
______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.