There are 2 messages in this thread.
You are currently looking at messages 0 to 2.
Hi, does anybody know how to switch of the LVDS output pins of a Cyclone II? I use the "alt_lvds" megafunction but there are no inputs to this megafuction to enable or disable the LVDS output pins. I thought about writing my own serializer as a workaround but I have no idea how this is done. But it should be possible by using the double data rate IOs and some shift registers. Thanks. -- --------------------------------- --- -- - Posted with NewsLeecher v3.7 Final Web @ http://www.newsleecher.com/?usenet ------------------- ----- ---- -- -
Setting an output pin to LVDS is not part of the megafunction. You can use the assignment editor to accomplish what you want. Writing your own serailizer usually takes a fairly good understanding of the hardware, setup/hold times, and jitter. "tentacle" <o...@online.ms> wrote in message news:5a2cd$456f558e$54965988$2...@nf4.news-service.com... > Hi, > > does anybody know how to switch of the LVDS output pins of a Cyclone > II? > > I use the "alt_lvds" megafunction but there are no inputs to this > megafuction to enable or disable the LVDS output pins. > > I thought about writing my own serializer as a workaround but I have > no idea how this is done. But it should be possible by using the > double data rate IOs and some shift registers. > > Thanks. > > > -- > --------------------------------- --- -- - > Posted with NewsLeecher v3.7 Final > Web @ http://www.newsleecher.com/?usenet > ------------------- ----- ---- -- - >______________________________