Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
Comp.Arch.FPGA | Spartan 3 configuration
There are 2 messages in this thread.
You are currently looking at messages 0 to 2.
Spartan 3 configuration - gopal_amlekar - 2010-02-03 03:40:00
Hello, Few days back, I got a good help from this forum about CPLD programming. I have succeded in making my own design based on a microcontroller toconfigure a spartan 2 as well as to program XC95108 CPLD. Now I am moving to Spartan 3 and struggling with it. A very good documentfrom Xilinx about Spartan 2 configuration is XAPP188 (Specifically table 7on page 11) which lists steps to be taken while configuring Spartan 2. I did not find such clear information about Spartan 3. Does anyone knowmore details about the steps for spartan 3? I have already referred to their Spartan 3 configuration guide UG332 but itis slightly confusing. I also tried the way XC3Sprog is implemented but it did not work. Please let me know if you know anything about it. I can share information about spartan2 and xc95... Thanks and regards, --------------------------------------- Posted through http://www.FPGARelated.com______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.
Re: Spartan 3 configuration - gopal_amlekar - 2010-02-03 05:15:00
I got it. Spartan 3 needs a Jprogram instruction before config_in instruction.Spartan 3 has a 6 bit IR Vs 5 bit IR of Spartan 2. Rest of the things are almost similar or same. Thanks.. >Hello, > >Few days back, I got a good help from this forum about CPLD programming. >I have succeded in making my own design based on a microcontroller to >configure a spartan 2 as well as to program XC95108 CPLD. > >Now I am moving to Spartan 3 and struggling with it. A very good document >from Xilinx about Spartan 2 configuration is XAPP188 (Specifically table7 >on page 11) which lists steps to be taken while configuring Spartan 2. > >I did not find such clear information about Spartan 3. Does anyone know >more details about the steps for spartan 3? > >I have already referred to their Spartan 3 configuration guide UG332 butit >is slightly confusing. > >I also tried the way XC3Sprog is implemented but it did not work. > >Please let me know if you know anything about it. > >I can share information about spartan2 and xc95... > >Thanks and regards, > >--------------------------------------- >Posted through http://www.FPGARelated.com > --------------------------------------- Posted through http://www.FPGARelated.com