Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
Comp.Arch.FPGA | Progrmming a flash connected to a Stratix II GX
There are 2 messages in this thread.
You are currently looking at messages 0 to 2.
Progrmming a flash connected to a Stratix II GX - jfh - 2010-02-08 23:24:00
Hi; We are trying to program a CFI Flash (Numonyx TE28F320J3D75) using the flash programmer of Quartus II/EDS 9.1. We followed the instructions given in the User's Guide (from february 2010 !), and the programmer is reading the CFI table correctly, but when it comes to actual programming, it stops at 0%, with the following message : " Program failed Error code : 4 in .....nios2flashprogrammer.exe .... " In parallel, we have been running read and write tests on the flash and they are passing. Thus we suspect that something may be wrong with the flash programmer... would you have any idea of what we need to check and what we can do to have a bit more visibility of what's going on ? Best regards, JF______________________________
Newest Blog by Chris Felton: "The Spartans". Click here to read.
Re: Progrmming a flash connected to a Stratix II GX - Alan Fitch - 2010-02-09 05:02:00
jfh wrote: > Hi; > > We are trying to program a CFI Flash (Numonyx TE28F320J3D75) using the > flash programmer of Quartus II/EDS 9.1. We followed the instructions > given in the User's Guide (from february 2010 !), and the programmer > is reading the CFI table correctly, but when it comes to actual > programming, it stops at 0%, with the following message : > " > Program failed > Error code : 4 in .....nios2flashprogrammer.exe .... > " > In parallel, we have been running read and write tests on the flash > and they are passing. > Thus we suspect that something may be wrong with the flash > programmer... would you have any idea of what we need to check and > what we can do to have a bit more visibility of what's going on ? > > Best regards, > > JF If you've tried all the advice in section 3 (--debug, flash override file etc), perhaps you should follow the last sentence :-) "If you find a CFI-compliant device that does not work with the Nios II Flash Programmer, please report it to Altera Technical Support." regards Alan -- Alan Fitch Senior Consultant Doulos – Developing Design Know-how VHDL * Verilog * SystemVerilog * SystemC * PSL * Perl * Tcl/Tk * Project Services Doulos Ltd. Church Hatch, 22 Marketing Place, Ringwood, Hampshire, BH24 1AW, UK Tel: + 44 (0)1425 471223 Email: a...@doulos.com Fax: +44 (0)1425 471573 http://www.doulos.com ------------------------------------------------------------------------ This message may contain personal views which are not the views of Doulos, unless specifically stated.______________________________
Newest Blog by Chris Felton: "The Spartans". Click here to read.