Anybody knows if it can be simply done to
convert
a jedec file read out from an ALtera EP320 and to 
program into a PALCE16V8 .
note it is for repair purposes so I haven't the design
software of the ALtera.
Regards,
MB
--
http://matthieu.benoit.free.fr/

Matthieu Benoit wrote:
> Anybody knows if it can be simply done to convert
> a jedec file read out from an ALtera EP320 and to 
> program into a PALCE16V8 .
> note it is for repair purposes so I haven't the design
> software of the ALtera.
> Regards,
> MB
> --
> http://matthieu.benoit.free.fr/

  Yes, some companies did/do JEDEC converters.
This from the WinPLACE manual, so it looks like you can go EP320 -> 18CV8

-jg

http://www.ictpld.com/WinPLACE/index.htm

> JEDEC File Translation
> The JEDEC-file translation utility of the WinPLACE Software translates
> JEDEC files created for programming other PLD's (PAL's, GAL's, EPLD's
> etc.,) to JEDEC files used for programming PEEL Devices. The translated
> JEDEC file will program a PEEL Device to be a pin-to-pin replacement for
> the original PLD.
> The JEDEC file translation is available in Options .. Translators .. JEDEC
> to JEDEC in the design window.
> The translated PEEL JEDEC file is given the name of the original file with
> the ".JED" extension modified to ".JEX". The ".JEX"
file can then be used to
> program your PEEL devices.
> Devices that translate to the PEEL18CV8
> PAL16L8 PAL16R8 PAL16R6 PAL16R4
> PAL16P8 PAL16RP8 PAL16RP6 PAL16RP4
> PAL10L8 PAL12L6 PAL14L4 PAL16L2
> PAL10H8 PAL12H6 PAL14H4 PAL16H2
> PAL16H8 PAL16LD8 PAL16HD8 PAL18P8
> PAL18V8 GAL16V8 EP310 EP320
> 5C031 5C032 EP330 PAL18U8

matthieu asks -

>Anybody knows if it can be simply done to convert
>a jedec file read out from an ALtera EP320 and to 
>program into a PALCE16V8 .
>note it is for repair purposes so I haven't the design
>software of the ALtera.
>Regards,
>MB
>--
>http://matthieu.benoit.free.fr/
>
visit the Lattice website - www.latticesemi.com - 
and download paltogal software.  This utility converts almost all SPLD jedec to
the 
equivalent GAL/PAL device, and is FREE -

good luck with your design - 
Michael Thomas
LSC FAE
NY/NJ