Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
Comp.Arch.FPGA | Spartan-3E starter kit USB schematics ? (again)
There are 3 messages in this thread.
You are currently looking at messages 0 to 3.
Spartan-3E starter kit USB schematics ? (again) - EvSpace - 2010-06-23 07:52:00
On the Xilinx Spartan-3E Starter kit board there is an USB interface to program the FPGA chip via JTAG. However this part of the schematics is missing from the documentation: http://www.xilinx.com/support/documentation/boards_and_kits/ug230.pdf I remember that someone actually did locate the connections around 2006/2007 and put the schematics online for that section. But I can't locate it. Someone knows where to find it ..? (The USB port is wired to the CY7C68013A-100AXC containing an 8051 cpu as the primary USB interface. I think it's connected to the XC2C64A-5VQ44C CPLD as well. I have seen the http://rmdir.de/~michael/xilinx/ page too)______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.
Re: Spartan-3E starter kit USB schematics ? (again) - Uwe Bonnes - 2010-06-23 08:22:00
EvSpace <n...@curr.com> wrote: > On the Xilinx Spartan-3E Starter kit board there is an USB interface to > program the FPGA chip via JTAG. However this part of the schematics is > missing from the documentation: > http://www.xilinx.com/support/documentation/boards_and_kits/ug230.pdf > I remember that someone actually did locate the connections around 2006/2007 > and put the schematics online for that section. But I can't locate it. > Someone knows where to find it ..? There is some discussion (in german) on http://www.mikrocontroller.net/topic/142358#new -- Uwe Bonnes b...@elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
Re: Spartan-3E starter kit USB schematics ? (again) - John McCaskill - 2010-06-23 12:17:00
On Jun 23, 6:52=A0am, EvSpace <n...@curr.com> wrote: > On the Xilinx Spartan-3E Starter kit board there is an USB interface to > program the FPGA chip via JTAG. However this part of the schematics is > missing from the documentation:http://www.xilinx.com/support/documentatio= n/boards_and_kits/ug230.pdf > > I remember that someone actually did locate the connections around 2006/2= 007 > and put the schematics online for that section. But I can't locate it. > Someone knows where to find it ..? > > (The USB port is wired to the CY7C68013A-100AXC containing an 8051 cpu as > the primary USB interface. I think it's connected to the XC2C64A-5VQ44C > CPLD as well. I have seen thehttp://rmdir.de/~michael/xilinx/page too) Look at the schematics for the SP605 development board. They include the USB JTAG pages of the schematics, as do a few of the other newer development boards. Regards, John McCaskill www.FasterTechnology.com