Sign in
Search Comp.Arch.FPGA
fpga by Keywords
Altera | ASIC | CPLD | Cyclone | DCM | DDR | DSP | Ethernet | ISE | JTAG | Linux | LVDS | Microblaze | ML310 | Modelsim | NIOS | OPB | PCI | Quartus | RocketIO | SDRAM | Spartan | Spartan3 | SRAM | Stratix | Verilog | VHDL | Virtex | Virtex-4 | Virtex-II | Xilinx | XST
Ads
See Also
Comp.Arch.FPGA | ML605 Dev Board Problems
There are 2 messages in this thread.
You are currently looking at messages 0 to 2.
ML605 Dev Board Problems - steveb - 2010-06-29 20:45:00
We are struggling to get the ML605 board running on our Dell PowerEdgeSC430 in slot 4 (x8 slot). Out of the box the unit did not recognize thecard but I could view the system PCI architecture using PCITree. Afterbuilding a PCIe x8 gen 1 core using ISE 12.1 (with the patch per AR#35422)per xtp0044.pdf, the unit now complains of an error when initializing PCIExptress slot 4. I have tried all three settings of jumper J42. There areno other expansion slots being used. Has anyone struggled in a similar way bringing up their ML605 using thePCIe? --------------------------------------- Posted through http://www.FPGARelated.com______________________________
Join the blogging team on FPGARelated.com and earn rewards! Details Here.
Re: ML605 Dev Board Problems - he - 2010-06-30 00:46:00
Am 30.06.2010 02:45, schrieb steveb: > We are struggling to get the ML605 board running on our Dell PowerEdge > SC430 in slot 4 (x8 slot). Out of the box the unit did not recognize the > card but I could view the system PCI architecture using PCITree. After > building a PCIe x8 gen 1 core using ISE 12.1 (with the patch per AR#35422) > per xtp0044.pdf, the unit now complains of an error when initializing PCI > Exptress slot 4. I have tried all three settings of jumper J42. There are > no other expansion slots being used. > > Has anyone struggled in a similar way bringing up their ML605 using the > PCIe? > > > > --------------------------------------- > Posted through http://www.FPGARelated.com Did you try using 11.4 as suggested by the xtp044? I ran into some problems, too, using 12.1 + patch (without further investigation) but it all worked fine with 11.4 hth