Forums Search for: Linux
editing waveforms under Linux
inHi all, I want to graphically create and edit waveforms for documentation purpose. Xilinx's HDL Bencher does not exist under Linux... (too...
Hi all, I want to graphically create and edit waveforms for documentation purpose. Xilinx's HDL Bencher does not exist under Linux... (too bad: it can export in HDL) Waveformer is $6000, gasp! A guy here uses some commercial spreadsheet...;-) please tell me what do you use!
Xilinx Impact Cable Drivers for 64-bit Linux?
inHas anyone gotten Xilinx Impact to work under 64-bit Linux? Has Xilinx released Linux kernel 2.6 drivers for 64-bit? Thanks, -Chris --...
Has anyone gotten Xilinx Impact to work under 64-bit Linux? Has Xilinx released Linux kernel 2.6 drivers for 64-bit? Thanks, -Chris -- | Christopher Cole, Cole Design and Development cole@coledd.com | | Embedded Electronics and Software Design http://coledd.com |
Suse 9.1 Linux and Xilinx ISE 6.2i
inHello, I just installed Xilinx ISE 6.2i on a Linux box and it is sluggish as anything. Does anyone know why? I am running on a P4 1.7GHz w/...
Hello, I just installed Xilinx ISE 6.2i on a Linux box and it is sluggish as anything. Does anyone know why? I am running on a P4 1.7GHz w/ 1GB of RAM. On windows, it is much more zippy. Could it be the gui toolkit that Xilinx is using (it seems like JAVA.......slow as a slug....)? Thanks. Salman
linux on virtex 2 pro board
inHi All, I am trying to boot linux on virtex 2 pro P7-ff672 board. My problem is that I am able to boot the linux image(ppc) on bitstream...
Hi All, I am trying to boot linux on virtex 2 pro P7-ff672 board. My problem is that I am able to boot the linux image(ppc) on bitstream generated by EDK 6.1 but not with bitstream generated by EDK 6.2 (SP2). Does anyone had similar experience ? I wonder if the problem is EDK 6.2 or I need to change my liuux image which should not be the case as I am using the same version of cores. Fol...
Linux 2.6 PCI Device Driver on Virtex 4
inI have spent the past few months slowly trying to get a PCI design with Linux 2.6 on the Virtex 4. I have been able to overcome some of the...
I have spent the past few months slowly trying to get a PCI design with Linux 2.6 on the Virtex 4. I have been able to overcome some of the hurdles; however, I am still unable to boot up a working system. If anyone has tried to do this (or has already done this) I would apprecaite any help or suggestions. I can go into more detail as to what I have done and where I am stuck if there is anyon...
Memory Allocation for ISE tools in Linux
Hello All, Can anyone tell me the exact procedure to dedicate physical memory for Xilinx applications in Linux? I know that we need to set the...
Hello All, Can anyone tell me the exact procedure to dedicate physical memory for Xilinx applications in Linux? I know that we need to set the priority using the =93nice=94 command but I require the steps to do it. I have done it for windows using boot.ini file. Appreciate your inputs. Thanks & Regards, Vaibhav
Linux 2.6 on the Xilinx ML310 board
inI haven't been able to find any useful resources on how to install the new Linux 2.6 kernel on the ML310 board. Does anyone have an idea on...
I haven't been able to find any useful resources on how to install the new Linux 2.6 kernel on the ML310 board. Does anyone have an idea on how to do that ? (which drivers, patches I would have to use ?) Thanks a lot, Sven
Altium Live Desing Eval and Linux
inIs there an implementation of Linux for the Live Design Eval Board(Xilinx). May be a version of uCLinux for Mircoblaze? Thx Eric
Is there an implementation of Linux for the Live Design Eval Board(Xilinx). May be a version of uCLinux for Mircoblaze? Thx Eric
xilinx spi example under linux
inDoes anyone have any example code that uses the Xilinx SPI Linux driver? I just need to read a temperature sensor so something simple that opens...
Does anyone have any example code that uses the Xilinx SPI Linux driver? I just need to read a temperature sensor so something simple that opens the device and does read and writes should work. Thanks, Clark
Digilent USB module linux
inHello, I try to communicate with a Digilent S3- Board via USB-Module 2 using linux (libusb). Has anybody successfully transmitted or received...
Hello, I try to communicate with a Digilent S3- Board via USB-Module 2 using linux (libusb). Has anybody successfully transmitted or received data this way (the win32 way works) ? best regards Andreas
EDK9.1 linux registration fails (vista ok)
inHi groups, is there any reason for edk 9.1 registration failure with linux (I use the same id that successfully register edk on the same dual...
Hi groups, is there any reason for edk 9.1 registration failure with linux (I use the same id that successfully register edk on the same dual boot vista/ ubuntu laptop ?)
ISE Simulator not present in Linux?
Hi, I just succesfully installed ISE BaseX on Linux. All is OK. BUT the ISE simulator is not present in the list of available simulators in...
Hi, I just succesfully installed ISE BaseX on Linux. All is OK. BUT the ISE simulator is not present in the list of available simulators in project properties. Please help! Cheers Mehdi.
MPMC2 and MontaVista Linux
inHi, how can I make a MPMC2 and a MontaVista Linux on ML403 from Xilinx work together? Is there a howtoguide for that problem or has anybody...
Hi, how can I make a MPMC2 and a MontaVista Linux on ML403 from Xilinx work together? Is there a howtoguide for that problem or has anybody experiences with that stuff? Thanks a lot :-) Eric
Beginner: running EDK 6.3 in linux
inHello, This is a beginner question. I have EDK 6.3 installed in a linux system. I dont know how to start the EDK/XPS and begin with Base system ...
Hello, This is a beginner question. I have EDK 6.3 installed in a linux system. I dont know how to start the EDK/XPS and begin with Base system builder. can anybody help me . thank you
Foundation evaluation on linux
inOk, So I'm trying to convince myself that spending the $3000 on Foundation will be a good move, with one of the main reasons being that I...
Ok, So I'm trying to convince myself that spending the $3000 on Foundation will be a good move, with one of the main reasons being that I won't have to constantly switch back and forth from Windows (to run Foundation, or WebPack currently) and Linux (to run everything else). I ordered (and eventually obtained - Xilinx *please* don't use DHL in the UK, it took 3 *hours* on the phone to r...
EDK 9.2i install issues in Linux
inI know Xilinx does not officially support anything other than RedHat Enterprise Linux, yet so many people have installed it on other versions...
I know Xilinx does not officially support anything other than RedHat Enterprise Linux, yet so many people have installed it on other versions such as Ubuntu, Gentoo, etc. I am trying to install it on openSuse 10.3 and am having a very difficult time. The instructions I have say to run ./setup in the root of the CD. It runs but very quickly and no error messages are given either. Cd into
Linux support in SDK 6.1i
Does SDK 6.1i run in native mode under Linux? Is it shipping? BTW: Has anybody in Scandinavia received their ISE 6.1i package...
Does SDK 6.1i run in native mode under Linux? Is it shipping? BTW: Has anybody in Scandinavia received their ISE 6.1i package yet? Petter -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
PC requirements for ISE webpack
inI am thinking of buying (or upgrading) my PC for an FPGA project. At the moment I am using a windows laptop for synthesis and P&R runs. I use...
I am thinking of buying (or upgrading) my PC for an FPGA project. At the moment I am using a windows laptop for synthesis and P&R runs. I use a Linux PC for simulation runs. Ideally I would like to move everything onto a linux PC. I have not got to the stage of debugging the design. I would say I need a PC with lots of physical memory. A parallel port (probably via a PCI interface) ...
Webpack 10.1 on 64-bit linux
inCongrats to Xilinx on the recent release of ISE 10.1, and thanks for simultaneously releasing WebPack along with ISE Foundation. But... it...
Congrats to Xilinx on the recent release of ISE 10.1, and thanks for simultaneously releasing WebPack along with ISE Foundation. But... it appears the hoops necessary to get the 32-bit webpack working under 64-bit linux (in this case, 64-bit ubuntu 7.10) have changed... I wanted to share what I found so that others might have similar success: The real challenge is, once you've untarred t...
Xilinx EDK on Linux
Hi folks, two things about the EDK on Linux: 1) If I have paid for BaseX 6.3i (and received an upgrade to 7.1i), and also paid for the EDK...
Hi folks, two things about the EDK on Linux: 1) If I have paid for BaseX 6.3i (and received an upgrade to 7.1i), and also paid for the EDK 6.3, is there an upgrade path for the EDK as well ? I've only just bought the EDK, do I have to buy it again, or is it under the same upgrade conditions as ISE ? Or is it just not ready yet ? 2) I think I've found a bug in the EDK's X interface - if...