About the socket in ML310

Started by more in comp.arch.fpga13 years ago

Hello I want to set up a conncetion between ML310 and the PC. I set th PC as server and the ML310 board as a client. Is there any socket...

Hello I want to set up a conncetion between ML310 and the PC. I set th PC as server and the ML310 board as a client. Is there any socket AP in Linux operating system in the board ML310 that I can use Thanks!!


ml310: linux boot faillure

Started by khoryl in comp.arch.fpga13 years ago 1 reply

I'm trying to use a montavista kernel on a ml310 but when I run it, I always have the same error even if I follow the xilinx instructions. In...

I'm trying to use a montavista kernel on a ml310 but when I run it, I always have the same error even if I follow the xilinx instructions. In fact when booting h*the kernel the ml310 freeze and the opb led turns to red. I can't find where is the problem. can you help me? thanks a lot


Xilinx ML310 logical analyzer

Started by Anonymous in comp.arch.fpga11 years ago

how to see the read signal in ML310? i know ChipScope can do it, but i think it's not easy to add it into my design. i survey another way to...

how to see the read signal in ML310? i know ChipScope can do it, but i think it's not easy to add it into my design. i survey another way to see the real signal, does LA can see the real signal in ML310?


Newbie : Xilinx Ml310 platform

Started by sudheer in comp.arch.fpga13 years ago 4 replies

Hi is it possible to connect any secondary board to ml310 through its expansion slots.If so which cable I have to use and where can I get it. I...

Hi is it possible to connect any secondary board to ml310 through its expansion slots.If so which cable I have to use and where can I get it. I want to connect USB and Firewire i/o ports to main PPC through its gpio pins directly not through pci slots (which are available on ml310 already) as I need to analyze the processor and peripheral interaction. Does anyone had an idea which simple boa...


Linux on Xilinx ml310

Started by Henning Zabel in comp.arch.fpga13 years ago 1 reply

Hallo, i try to install debian (woody) for ppc on the xilinx ml310, but without success. It seems that the powerpc build in the fpga can't...

Hallo, i try to install debian (woody) for ppc on the xilinx ml310, but without success. It seems that the powerpc build in the fpga can't execute the binaries of the installer. Has someone tried to install a complete debian or suse linux on the ml310 board ? Greetings


Xilinx ML310 programming failure

Started by Anonymous in comp.arch.fpga11 years ago

I was wondering if anyone using the ML310 is having similar issues as I am -- What I'm using: - Platform Cable USB - Xilinx ML310 All the...

I was wondering if anyone using the ML310 is having similar issues as I am -- What I'm using: - Platform Cable USB - Xilinx ML310 All the latest software updates as of today (11/13/06) - EDK v8.2.02 - ISE v8.2.02 - IP Updates v2 I'm downloading the bitstream onto the board from EDK, and it always shows that it was successful. The board, however, randomly does not function as it's su...


Download bit stream onto ml310 ( virtex 2 pro ) using uart cable

Started by Nitesh in comp.arch.fpga12 years ago 2 replies

Hello, I am using Xilinx EDK 7.1 and ml310 development board from Xilinx. I have fedora core 2 OS on my PC. I have problem downloading design...

Hello, I am using Xilinx EDK 7.1 and ml310 development board from Xilinx. I have fedora core 2 OS on my PC. I have problem downloading design onto the fpga.I use minicom to connect to the ml310 board. It does connect at 9600 8N1 parameters . I get the following prompt in the minicom window : Enter Desired System ACE CF Configuration . 0: ACE-loader. 1: Linux w/PCI. 2: Vx


ML310 personality modules...

Started by Nicholas Weaver in comp.arch.fpga13 years ago

Does anyone have any gigabit ethernet (copper or fiber) personality module designs for the ML310? Thanks. -- Nicholas C. Weaver. to...

Does anyone have any gigabit ethernet (copper or fiber) personality module designs for the ML310? Thanks. -- Nicholas C. Weaver. to reply email to "nweaver" at the domain icsi.berkeley.edu


About Xilnet and LWIP library access on board ML310!

Started by more in comp.arch.fpga13 years ago

Hello I want to use ethernet to transmit data from pc to ML310. I thin I can use Xilnet or LWIP library to establish the sockets to...

Hello I want to use ethernet to transmit data from pc to ML310. I thin I can use Xilnet or LWIP library to establish the sockets to receiv data. But on board ML310, the ethernet is not connected to OPB bu directly but through PCI bus. So when I choose Xilnet or LWI library,I cannot bind any instance to it. In this way, I canno generate library successfully and I cannot use these library...


Linux 2.6 on the Xilinx ML310 board

Started by Sven Gowal in comp.arch.fpga12 years ago 3 replies

I haven't been able to find any useful resources on how to install the new Linux 2.6 kernel on the ML310 board. Does anyone have an idea on...

I haven't been able to find any useful resources on how to install the new Linux 2.6 kernel on the ML310 board. Does anyone have an idea on how to do that ? (which drivers, patches I would have to use ?) Thanks a lot, Sven


Problem: Invalid Processor Version Number 0x00000000- EDK-7.1- latest service pack, ML310, bootloop, download bitsream

Started by chakra in comp.arch.fpga12 years ago 1 reply

Hi all, Am working on ML310 board, and EDK. I get similar problem like Xilinx Answer database 18265, 21296, but not quite. The exact problem...

Hi all, Am working on ML310 board, and EDK. I get similar problem like Xilinx Answer database 18265, 21296, but not quite. The exact problem is in the subject and this is what I do, to land in the problem. A. I create a project in EDK7.1 for ML310 board 1.I initialize the bootloop for PPC405_0 (mark to initialize BRAM ), and unmark the BRAM in the project TestApp. 2.Generate Lib, Bs...


documents on practicing microblaze ( ML310 ) ?

Started by Hur in comp.arch.fpga13 years ago 2 replies

hi i want to be familiarized with microblaze usage with ML310 board. Someone can tell me which documents (tutorial, or user guide, etc) will...

hi i want to be familiarized with microblaze usage with ML310 board. Someone can tell me which documents (tutorial, or user guide, etc) will be best to follow up and be familiarized with it.... Thankyou in advance


EDK: Using DCR bus on ML310-based project

Started by my.king in comp.arch.fpga11 years ago 3 replies

Hi, I'm working with the ML310 eval board. Is there anyone who has a working example on how to create a custom IP on the DCR bus...

Hi, I'm working with the ML310 eval board. Is there anyone who has a working example on how to create a custom IP on the DCR bus (and accessing it from the PPC405)? Thanks.


FPGA configuration mode on ML310

Started by grant0920 in comp.arch.fpga10 years ago 4 replies

Hi! everyone I have a very basic problem. I know that the 6-position DIP switch on the ML403 board can control the configuration address and...

Hi! everyone I have a very basic problem. I know that the 6-position DIP switch on the ML403 board can control the configuration address and FPGA configuration mode. On the ML310 board, I am not sure where can set the FPGA configuration mode. I want to set the configuration mode of my ML310 borad as the SelectMAP mode. Please tell me how to set its FPGA configuration mode. Thanks very much...


PCI configuration for ML310

Started by igel...@gmail.com in comp.arch.fpga12 years ago 5 replies

Hello All, I'm trying to get Linux working on the Xilinx ML310 using a PCI hardware configuration, other than the one provided by Xilinx. I...

Hello All, I'm trying to get Linux working on the Xilinx ML310 using a PCI hardware configuration, other than the one provided by Xilinx. I have a base configuration which I created using the EDK 7.1sp1. I've been able to compile a 2.4.30pre-1 linuxppc kernel, after making little modifications to the source due to some values (like the device ID of the OPB-PCI bridge) were hardcoded into...


Help using the ML310 developement board

Started by jack lalo in comp.arch.fpga13 years ago

Hello, I have to use a Xilinx ML310 developement board in my final year project to test a VHDL design and to use Chipscope. My question is,...

Hello, I have to use a Xilinx ML310 developement board in my final year project to test a VHDL design and to use Chipscope. My question is, is it necessary to use the parallel Cable IV in order to configure the Virtex 2Pr??? if so how can i use chipscope in order to read out my internal signals??? is it possible to use only the compact flash to do all these things?? Thanls a lot


Cannot use ML310 DDR

Started by king_azman in comp.arch.fpga12 years ago 3 replies

hi, i'm trying to work with the ddr sdram on the ml310 development board. i tried creating a simple base system with the ddr using the bsb...

hi, i'm trying to work with the ddr sdram on the ml310 development board. i tried creating a simple base system with the ddr using the bsb wizard. i also changed the ucf file as in the sample file provided. however, i keep getting 'memory test - failed" when running the generated memory test program. can anybody help me?


Loading from Compact Flash on ML310...

Started by Xesium in comp.arch.fpga10 years ago 3 replies

Hi everybody, I have written a very simple code for microblaze on Virtex II-Pro (XC2VP30 on ML310 board) which basically writes something to...

Hi everybody, I have written a very simple code for microblaze on Virtex II-Pro (XC2VP30 on ML310 board) which basically writes something to STD-OUT (through uart). When I load the design to the FPGA through parallel cable IV everything works perfectly which gives me the idea that basically there is nothing wrong with the design in general and the code. I've been trying to load the design th...


webcamera access with ML310

Started by VB in comp.arch.fpga12 years ago

I am using ML310 in STANDALONE along with usb based Quickcam expreess(Web camera) for my project on real time image processing. I came to know...

I am using ML310 in STANDALONE along with usb based Quickcam expreess(Web camera) for my project on real time image processing. I came to know that it is possible to access the usb port of the board using the linux kernel. I am interested in accessing the port to recieve the data(frames) from my webcamera and transfer the contents into the Bram. Any help in this regard would be of utmost...


About the ethernet access on the ML310 board!

Started by more in comp.arch.fpga13 years ago

Hello I want to access the ethernet on the ML310 board to transfer dat to a PC and receive data from a PC. But I find the only way to...

Hello I want to access the ethernet on the ML310 board to transfer dat to a PC and receive data from a PC. But I find the only way to acces the ethernet is under the operating system. Then I chose Linux. Can directly create a c file in Linux and then compile and execute it? I that way, how can I download the bitstream from EDK to the board? I don't quite understand how to use Linu...