> Did you try just loading the data ?
> Some ee devices simply over-write
Yes, I tried this, and it didn't work. After a number of people
on other forums suggested the same, I tried it again, and it worked!
So, I must have had a dirty contact on the chip that didn't connect
to the programming socket.
Thanks!
Jon
Reply by jg●March 7, 20132013-03-07
Did you try just loading the data ?
Some ee devices simply over-write
Reply by Jon Elson●March 3, 20132013-03-03
(Sorry, this is a bit off topic, but I do use this to
load bitfiles into FPGAs.)
I have a Xeltek Superpro/Z eprom programmer, with their
winsp ver. 1.0 software, running on Win 2K/Pro.
Today I had need to erase and reprogram an Atmel 17LV256
EEPROM, but the erase button on the programmer GUI is grayed
out. I can't remember if I ever did this before. I used
to use UV-erasable EPROMS, but this one is electrically erasable.
Is there a setting or option that enables erasing?
(I know if I try to contact Xeltek, they will try to sell me
a new programmer.)
Thanks in advance for any hints!
Jon