shabana_rizvi@yahoo.com (rider) wrote in message news:<ca3a68c8.0309130017.560b304d@posting.google.com>...
> Hi!
> 
> Thanks to the forum for satisfactory replies to my previous queries. I
> have one other query regarding FPGA configuration. I am planning to
> use Atmel's ATLV256 EPROM to configure my spartan 2 XC2s150[Its in DIP
> package so easy to program from my universal programmer]. The
> RESET/OE(bar) pin of ATLV256 can be programmed to RESET(bar)/OE[i.e.
> active LO RESET which the spartan 2 requires]. My question is that
> does the ISE5.1 support this feature to program ATLV256's pin? If not
> then whats the work around?

you can use ise/impact to generate bitstreams and prom files, 
but no 3rd party config devices are directly supported.
you need to use Atmel CPS software to program the ATLV

antti

Hi!

Thanks to the forum for satisfactory replies to my previous queries. I
have one other query regarding FPGA configuration. I am planning to
use Atmel's ATLV256 EPROM to configure my spartan 2 XC2s150[Its in DIP
package so easy to program from my universal programmer]. The
RESET/OE(bar) pin of ATLV256 can be programmed to RESET(bar)/OE[i.e.
active LO RESET which the spartan 2 requires]. My question is that
does the ISE5.1 support this feature to program ATLV256's pin? If not
then whats the work around?

Regards
Rider