In article <Qwzwe.12169$zM2.10928@newsfe4-gui.ntli.net>, hans64@ht-
lab.com says...
>
> I emailed their support line to see if they can supply the board with a 1C12
> and they replied that an updated 2C20/2C35 is in the make. They offered to
> replace the board as soon as the 2C20/2C35 becomes available (obviously you
> need to pay the price difference :-).
>
> Hans.
> www.ht-lab.com
These guys appear to be pretty strong in the customer-service
department. I ordered one of their boards and they actually UPS
overnighted it from Taiwan to the US for $20 shipping.
The board powered up fine, and has a lot of stuff on it to play with (a
la the Spartan 3 boards), but I haven't had time to install the software
and mess with it as of yet.
-- john
------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------
Reply by Hans●June 29, 20052005-06-29
I emailed their support line to see if they can supply the board with a 1C12
and they replied that an updated 2C20/2C35 is in the make. They offered to
replace the board as soon as the 2C20/2C35 becomes available (obviously you
need to pay the price difference :-).
Hans.
www.ht-lab.com
"Tommy Thorn" <foobar@nowhere.void> wrote in message
news:RB6ue.1566$p%3.12347@typhoon.sonic.net...
> Alex Gibson wrote:
>> Came across this
>> http://www.terasic.com/english/fpga_01.htm
>>
>> Just wondering if anyone has one or has tried one?
>>
>> Designed for multimedia. EP1C6Q248C8
>> vga , tvout , audio out(line out) , ps2 , rs232 , usb programming
>> cf card , config prom , 16 bit audio , 1MB flash + 8MB ram.
>> Looks quite good for US$149
>
> I dare say. Run through the getting started manual and it doesn't seem to
> shabby. On page 46 they even remind you to take a rest :-) Too bad it's
> such a tiny FPGA and so little memory.
>
> Tommy
Reply by Tommy Thorn●June 22, 20052005-06-22
Alex Gibson wrote:
> Came across this
> http://www.terasic.com/english/fpga_01.htm
>
> Just wondering if anyone has one or has tried one?
>
> Designed for multimedia. EP1C6Q248C8
> vga , tvout , audio out(line out) , ps2 , rs232 , usb programming
> cf card , config prom , 16 bit audio , 1MB flash + 8MB ram.
> Looks quite good for US$149
I dare say. Run through the getting started manual and it doesn't seem
to shabby. On page 46 they even remind you to take a rest :-) Too bad
it's such a tiny FPGA and so little memory.
Tommy
Reply by Alex Gibson●June 22, 20052005-06-22
Came across this
http://www.terasic.com/english/fpga_01.htm
Just wondering if anyone has one or has tried one?
Designed for multimedia. EP1C6Q248C8
vga , tvout , audio out(line out) , ps2 , rs232 , usb programming
cf card , config prom , 16 bit audio , 1MB flash + 8MB ram.
Looks quite good for US$149
Alex