Hi Anup,
Current 5.2i version does not support SpartanXL. For using the XC4000 or
Spartan/XL devices, you should download the free ISE-Classics package (which
is basically version 4.2i +Sp-3) from here for the PAR support (no
synthesis): http://www.xilinx.com/webpack/classics/index.htm
For synthesis, you should use the old FPGA Express if you still have the
license, or go with a 3rd party synthesis tool like Leonardo/Synplify.
If you are based in India, I can help you with a CD, send me an email
offline.
--Neeraj
"Anup Kumar Raghavan" <araghava@asc.corp.mot.com> wrote in message
news:3F09321B.786229F8@asc.corp.mot.com...
> Hello I want to use Spartan XL FPGA for a project and found out that my
> installation of the Xilinx ISE 5.2 i (Alliance) does not support this
> device.
> I can only install later versions of the Spartan devices and not the XL
> family.
>
> Can I get some suggestions on what I should do to use Spartan XL? I dont
> want to go to the WebPack Option.
>
> Thanks
> Anup
>
>
>
Reply by Anup Kumar Raghavan●July 7, 20032003-07-07
Hello I want to use Spartan XL FPGA for a project and found out that my
installation of the Xilinx ISE 5.2 i (Alliance) does not support this
device.
I can only install later versions of the Spartan devices and not the XL
family.
Can I get some suggestions on what I should do to use Spartan XL? I dont
want to go to the WebPack Option.
Thanks
Anup