Wow. Good thing I looked at the rest of the thread before posting. I
thought you were talking about adders using the carry chain (also known
as ADC). Anyway....
Reply by shorty●October 18, 20052005-10-18
Has anyone looked at interfacing a Cyclone II or Stratix II with the
1Gsps, 8 bit A/D from National Semiconductor (ADC081000) ? I'm
looking for a reference design that will save me time rather than
creating my own...
Reply by Peter Alfke●October 17, 20052005-10-17
Regarding analog-to-digital converters, there are two important
parameters you have to consider first:
Accuracy ( = number of bits), and speed (number of conversion per
second)
Accuracy can be 4 bits to 20 bits, and conversion rate can be between 1
kHz and 1 GHz.
There is a lot of room for different types of interfaces...
Peter Alfke
Reply by pingboypulsar<spamoff>@hotmail.com●October 17, 20052005-10-17
Hi
This question has probably been asked a 1000 times. So here it is for 1001st time.
How do I go about implementing an adc to a fpga?
Hopefully someone can give me some areas to start in. Some links, reference materials, code etc.
What are the most commonly interfaced adc's, and the buses they use?
I currently am working with a spartan 3s 1500mb development board, and using the xilinx edk.
Im new to the area, but need to learn about interfacing asap.
thanks
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------