> my.king wrote:
> > Hi,
> >
> > I'm working with the ML310 eval board. Is there anyone who has a
> > working example on how to create a custom IP on the DCR bus (and
> > accessing it from the PPC405)?
> >
> > Thanks.
>
> I did it! It is quite easy. Take a look at Xilinx PLBtoOPB bridge core
> or similar IP with DCR bus.
>
> Cheers,
>
> Guru
Reply by eric●July 4, 20062006-07-04
I have a similar problem,
my way is to take a look at the GSRD desing from xilinx.
There is an intc core which implements a interface between
logic and ppc over the DCR.
Regards,
Eric
Guru schrieb:
> my.king wrote:
>> Hi,
>>
>> I'm working with the ML310 eval board. Is there anyone who has a
>> working example on how to create a custom IP on the DCR bus (and
>> accessing it from the PPC405)?
>>
>> Thanks.
>
> I did it! It is quite easy. Take a look at Xilinx PLBtoOPB bridge core
> or similar IP with DCR bus.
>
> Cheers,
>
> Guru
>
Reply by Guru●June 30, 20062006-06-30
my.king wrote:
> Hi,
>
> I'm working with the ML310 eval board. Is there anyone who has a
> working example on how to create a custom IP on the DCR bus (and
> accessing it from the PPC405)?
>
> Thanks.
I did it! It is quite easy. Take a look at Xilinx PLBtoOPB bridge core
or similar IP with DCR bus.
Cheers,
Guru
Reply by my.king●June 29, 20062006-06-29
Hi,
I'm working with the ML310 eval board. Is there anyone who has a
working example on how to create a custom IP on the DCR bus (and
accessing it from the PPC405)?
Thanks.