Reply by Dave Greenfield●January 31, 20082008-01-31
I suggest also considering transceiver speed, jitter and signal
integrity. Stratix II GX FPGAs provide a production qualified
transceiver speed of 6.375 Gbps which isn't addressed by V5 LXT.
Dave Greenfield
Altera Marketing
Reply by Gabor●January 29, 20082008-01-29
On Jan 29, 3:08 am, Goli <tog...@gmail.com> wrote:
> On Jan 28, 2:52 pm, "chaitanyakurm...@gmail.com"
>
> <chaitanyakurm...@gmail.com> wrote:
> > i need the equivalent Xilinx FPGA for the following altera devices.
>
> > - Altera Stratix II GX-60
>
> > - Altera Stratix II GX-90
>
> > in terms of the resources available in these devices (logic, block
> > ram, dcms, global clock etc) with those available in Xilinx FPGAs.
>
> > thanks
>
> Hi,
>
> It is very difficult to get a full feature to feature compatible
> device in both families. Both companies have different kind of
> resources, for Xilinx has 18Kbits size block RAMs, whereas Altera has
> 512bits and 4k bits block RAMs.
>
> But the rough way to compare is to compare the LUTs, i.e. four input
> Logic elements. Both the vendors give their FPGA logic capability in
> terms of equivalent Logic Elements.
>
> GX-60 has about 60K LEs, so you could think of using Virtex5, LX50T,
> which would have about 50K LEs,
>
> Similarly for GX-90 (90K LEs) you can take a look at Virtex5 LX85T
> (~85K LEs)
>
> --
> Goli
But watch out for inflated "logic element" count in Xilinx where
the actual number of LUTs is smaller. For V5, however you'll
probably need to port your design to see how it fares because
of the LUT6 vs LUT4 size factor. If you have a lot of paths
with multiple levels of logic, the LUT6 can help with speed
as well as logic element reduction.
Reply by Goli●January 29, 20082008-01-29
On Jan 28, 2:52 pm, "chaitanyakurm...@gmail.com"
<chaitanyakurm...@gmail.com> wrote:
> i need the equivalent Xilinx FPGA for the following altera devices.
>
> - Altera Stratix II GX-60
>
> - Altera Stratix II GX-90
>
> in terms of the resources available in these devices (logic, block
> ram, dcms, global clock etc) with those available in Xilinx FPGAs.
>
> thanks
Hi,
It is very difficult to get a full feature to feature compatible
device in both families. Both companies have different kind of
resources, for Xilinx has 18Kbits size block RAMs, whereas Altera has
512bits and 4k bits block RAMs.
But the rough way to compare is to compare the LUTs, i.e. four input
Logic elements. Both the vendors give their FPGA logic capability in
terms of equivalent Logic Elements.
GX-60 has about 60K LEs, so you could think of using Virtex5, LX50T,
which would have about 50K LEs,
Similarly for GX-90 (90K LEs) you can take a look at Virtex5 LX85T
(~85K LEs)
--
Goli
Reply by chai...@gmail.com●January 28, 20082008-01-28
i need the equivalent Xilinx FPGA for the following altera devices.
- Altera Stratix II GX-60
- Altera Stratix II GX-90
in terms of the resources available in these devices (logic, block
ram, dcms, global clock etc) with those available in Xilinx FPGAs.
thanks