>> Hey! Even i am trying to interface adc on Spartan 3e can you help me
>> out with the code as soon as possible!
> Could you be so kind and name the ADC chip ? Brand ,model etc...
Obviously not.
Best regards
Adam Górski
Reply by Mike Perkins●February 5, 20182018-02-05
On 05/02/2018 03:36, jayanth.kalvakuntla1996@gmail.com wrote:
> We are'nt lazyy.....We have tried out all the ways of doing it but
> faced a lot of problems.If you have a solution,do help us.you have
> never seen us and trying to judge us.Dont be soo arrogant
Whenever I see a post involving a rather dated starter kit and an
element of desperation implying a deadline I think of student.
When they want the code delivered saving them any work that might look
like 'laziness' to those who read the post.
You've said in an earlier post "We tried all our ways, but could not do
this."
If you post the code you have written you will no longer be considered
lazy, until then....................... I won't be holding my breath!
--
Mike Perkins
Video Solutions Ltd
www.videosolutions.ltd.uk
Reply by Mike Perkins●February 5, 20182018-02-05
On 05/02/2018 03:43, jayanth.kalvakuntla1996@gmail.com wrote:
> Our project is to monitor industrial parameters using fpga and take
> possible corrective actions when these parameters go beyond their
> limits.So,we need to convert analog parameters to digital ones and
> that's the reason we need the interfacing code of adc with fpga.we
> tried all our ways,but could not do this.
Is this an SPI or I2C ADC?
If so there must be a number of working examples on the 'net.
Google is your friend.
--
Mike Perkins
Video Solutions Ltd
www.videosolutions.ltd.uk
Reply by Adam Górski●February 5, 20182018-02-05
On 2018-02-01 06:10, jayanth.kalvakuntla1996@gmail.com wrote:
> Hey! Even i am trying to interface adc on Spartan 3e can you help me out with the code as soon as possible!
>
Could you be so kind and name the ADC chip ? Brand ,model etc...
Best regards
Adam Górski
Reply by ●February 4, 20182018-02-04
Our project is to monitor industrial parameters using fpga and take possible corrective actions when these parameters go beyond their limits.So,we need to convert analog parameters to digital ones and that's the reason we need the interfacing code of adc with fpga.we tried all our ways,but could not do this.
Reply by ●February 4, 20182018-02-04
Our project is to monitor industrial parameters using fpga and take possible corrective actions when these parameters go beyond their limits.So,we need to convert analog parameters to digital ones and that's the reason we need the interfacing code of adc with fpga.we tried all our ways,but could not do this.
Reply by ●February 4, 20182018-02-04
We are'nt lazyy.....We have tried out all the ways of doing it but faced a lot of problems.If you have a solution,do help us.you have never seen us and trying to judge us.Dont be soo arrogant
Reply by Marco●February 4, 20182018-02-04
Le 03/02/2018 à 15:33, jayanth.kalvakuntla1996@gmail.com a écrit :
> Actually i want the code..if you have it will you post it here it would be helpful!
>
Lazy!
Reply by Nicolas Matringe●February 4, 20182018-02-04
On 03.02.2018 15:30, jayanth.kalvakuntla1996@gmail.com wrote:
> Actually i want the whole code ..if you have it will you post it here it would be helpful for me
Maybe you could tell us a bit more about this project of yours ?
Nicolas
Reply by Mike Perkins●February 3, 20182018-02-03
On 03/02/2018 14:30, jayanth.kalvakuntla1996@gmail.com wrote:
> Actually i want the whole code ..if you have it will you post it here it would be helpful for me
This sounds like an assignment you've been given.
Shouldn't this work be your own?
--
Mike Perkins
Video Solutions Ltd
www.videosolutions.ltd.uk