>
> In MPMC v4.03 I don't find any hint that 1:2 clock ratio is not allowed
> for DDR1.
From looking at the source code I don't believe it will work... I don't
think it will work with v5.0 either...
/Mikhail
Reply by Florian●July 21, 20092009-07-21
On Jul 17, 11:48=A0pm, "MM" <mbmsv@yahoo.com> wrote:
> Does anyone know if I can run DDR1 type of memory at double the frequency=
ofMPMC4.03 (EDK10.1) main clock? Or is this possible for DDR2 only? I am
> having difficult time trying to understand this from the datasheet. So,
> before digging into the MPMC source code I thought I would try asking...
>
> Thanks,
> /Mikhail
Hi Mikhail
In MPMC v4.03 I don't find any hint that 1:2 clock ratio is not
allowed for DDR1.
In v5.02 the 1:2 clock ratio is described in chapter Performance...
Have fun
Florian
Reply by MM●July 17, 20092009-07-17
Does anyone know if I can run DDR1 type of memory at double the frequency of
MPMC4.03 (EDK10.1) main clock? Or is this possible for DDR2 only? I am
having difficult time trying to understand this from the datasheet. So,
before digging into the MPMC source code I thought I would try asking...
Thanks,
/Mikhail