Hi, I was able to make Xilinx Edition ModelSim(free) work both for verilog and vhdl. Follow the below procedure. What you can do is first install vhdl version, then copy vhdl folder from C:\Modeltech_xe_starter\xilinx\vhdl to different location. Then uninstall the modelsim and again install this time for verilog, this time you have C:\Modeltech_xe_starter\xilinx\verilog Now copy the vhdl from previous location to this location C:\Modeltech_xe_starter\xilinx\ If you now open the modelsim you have both libraries. Thanks rao
Good, affordable verilog simulator
Started by ●March 8, 2005
Reply by ●March 8, 20052005-03-08
Reply by ●March 10, 20052005-03-10