Hi, I'm using the Xilinx Platform Studio and I'm tryng to connect the embedded tri-mode-MAC with the PowerPC405. reading the datasheet seems that the PPC and the MAC are already connected to the DCR bus, but is not evident at all how to "see" in the XPS tree the MAC. I tryed to use the application "import/create user peripherial" without success. Does anyone have any experience at all? Thanks, Francesco
XILINX POWERPC <-> Embedded tri-mode-MAC connection
Started by ●August 11, 2005
Reply by ●August 11, 20052005-08-11
Check out Gigabit System Reference Design (GSRD): http://www.xilinx.com/gsrd/ It uses the Virtex4 embedded TEMAC, is delievered as an EDK project, and runs PowerPC Linux. Paul francesco.poderico@trendcomms.com wrote:> > Hi, I'm using the Xilinx Platform Studio and I'm tryng to connect > the embedded tri-mode-MAC with the PowerPC405. > reading the datasheet seems that the PPC and the MAC are already > connected to the DCR bus, but is not evident at all how to "see" in the > XPS tree the MAC. > I tryed to use the application "import/create user peripherial" without > success. > Does anyone have any experience at all? > > Thanks, > Francesco