Hi ! I installed ISE and EDK 6.2i with SP3, and ISE as a stange behavior. When I go through steps synthesis, P&R and .bit generation every thing is ok. If I launch impact or if I swap to another windows application and back to ISE, all green marks go back to ? and ISE launches the wholel flow !!!! It is a big waste of time ! Does anyone has a clue ? Just one point, there was a ISE 6.3 install on this computer which was not removed correctly. Thank you. St�phane.
ISE 6.2i strange behavior
Started by ●November 16, 2005
Reply by ●November 17, 20052005-11-17
"sjulhes" <t@aol.fr> wrote in message news:437b395e$0$10968$626a14ce@news.free.fr...> Hi ! > > I installed ISE and EDK 6.2i with SP3, and ISE as a stange behavior. > When I go through steps synthesis, P&R and .bit generation every thing is > ok. > If I launch impact or if I swap to another windows application and back to > ISE, all green marks go back to ? and ISE launches the wholel flow !!!! > It is a big waste of time ! > > Does anyone has a clue ? > > Just one point, there was a ISE 6.3 install on this computer which was not > removed correctly. > > Thank you. > > St�phane. > >Try using the "Run All" option after right-clicking in iMPACT and see what happens. Could be that you have a corrupted version of ISE 6.2 for which later modules (i.e. ISE 6.3) are in your setup. I would uninstall everything from the Xilinx folder and reinstall from scratch, but saving your projects using the archive option. Also make sure you are using Win XP or 2K pro. -Andrew
Reply by ●November 17, 20052005-11-17
Stephane, I experienced a somewhat similar problem several months back, and it too was with ise6.2. All the project files were on a remote workstation for some type of corporate back-up thing. It was rumored that it did on the fly file compression, had some type of disk file caching system, any who knows what else. I tried putting all my files on the local hard disk, and compiled from there. That solved my ISE dependence compiling problem. -Newman
Reply by ●November 18, 20052005-11-18
Thank you for your answers. I installed ISE + EDK 6.2 (without any SP from scratch) on on labtop and it works fine. I guess my desktop is corrupted with all these software install/uninstalls ! "sjulhes" <t@aol.fr> a �crit dans le message de news: 437b395e$0$10968$626a14ce@news.free.fr...> Hi ! > > I installed ISE and EDK 6.2i with SP3, and ISE as a stange behavior. > When I go through steps synthesis, P&R and .bit generation every thing is > ok. > If I launch impact or if I swap to another windows application and back to > ISE, all green marks go back to ? and ISE launches the wholel flow !!!! > It is a big waste of time ! > > Does anyone has a clue ? > > Just one point, there was a ISE 6.3 install on this computer which was not > removed correctly. > > Thank you. > > St�phane. > >