Hi,everybody. I have some questions about pci interface on Cyclone.Would someone help me? First,Which pins of PCI should be pull-up or pull-down on the board? Second,Do some resistors(33ohms or 50ohms) to be series between EP1C6 and PCI? Thanks.
PCI interface on CYCLONE(ep1c6)
Started by ●December 28, 2005
Reply by ●December 29, 20052005-12-29
eehinjor wrote:> Hi,everybody. > I have some questions about pci interface on Cyclone.Would someone help > me? > First,Which pins of PCI should be pull-up or pull-down on the board? > Second,Do some resistors(33ohms or 50ohms) to be series between EP1C6 > and PCI? > > Thanks.Without having used the Cyclone, I can say that if the PCI interface is a standard one, the pull ups/downs required are in the PCI spec (which I strongly suggest you read). Available at: http://www.pcisig.com/specifications Whether you need series resistors depends ont he physical characteristics of the drivers and the board. Cheers PeteS