Forums

max lvds IO speed on V2Pro

Started by sjulhes April 5, 2006
Hi,

We have to interface a V2Pro with a DSP's communication ports which have
LVDS links up to 500Mhz ( taken from datasheet ).

We have some experience on V2Pro LVDS I/O but at slow speed and we are
wondering what speed we will be able to reach with this LVDS DSP link.

DSP and FPGA are on the same board at a reasonnable distance ( something
like 10-15 cm ).

Does someone has a feedback on V2P high speed LVDS IO implementation ?
Are there special tips to use ?

Any link is welcomed.

Thanks for your help.

Stephane.


Stephane,

http://direct.xilinx.com/bvdocs/appnotes/xapp265.pdf

Is the applicable note for VII/VII Pro family.

Austin

sjulhes wrote:

> Hi, > > We have to interface a V2Pro with a DSP's communication ports which have > LVDS links up to 500Mhz ( taken from datasheet ). > > We have some experience on V2Pro LVDS I/O but at slow speed and we are > wondering what speed we will be able to reach with this LVDS DSP link. > > DSP and FPGA are on the same board at a reasonnable distance ( something > like 10-15 cm ). > > Does someone has a feedback on V2P high speed LVDS IO implementation ? > Are there special tips to use ? > > Any link is welcomed. > > Thanks for your help. > > Stephane. > >