Hi, I'm working with the ML310 eval board. Is there anyone who has a working example on how to create a custom IP on the DCR bus (and accessing it from the PPC405)? Thanks.
EDK: Using DCR bus on ML310-based project
Started by ●June 29, 2006
Reply by ●June 30, 20062006-06-30
my.king wrote:> Hi, > > I'm working with the ML310 eval board. Is there anyone who has a > working example on how to create a custom IP on the DCR bus (and > accessing it from the PPC405)? > > Thanks.I did it! It is quite easy. Take a look at Xilinx PLBtoOPB bridge core or similar IP with DCR bus. Cheers, Guru
Reply by ●July 4, 20062006-07-04
I have a similar problem, my way is to take a look at the GSRD desing from xilinx. There is an intc core which implements a interface between logic and ppc over the DCR. Regards, Eric Guru schrieb:> my.king wrote: >> Hi, >> >> I'm working with the ML310 eval board. Is there anyone who has a >> working example on how to create a custom IP on the DCR bus (and >> accessing it from the PPC405)? >> >> Thanks. > > I did it! It is quite easy. Take a look at Xilinx PLBtoOPB bridge core > or similar IP with DCR bus. > > Cheers, > > Guru >
Reply by ●July 4, 20062006-07-04
Thanks.. I'll look for that.. Guru wrote:> my.king wrote: > > Hi, > > > > I'm working with the ML310 eval board. Is there anyone who has a > > working example on how to create a custom IP on the DCR bus (and > > accessing it from the PPC405)? > > > > Thanks. > > I did it! It is quite easy. Take a look at Xilinx PLBtoOPB bridge core > or similar IP with DCR bus. > > Cheers, > > Guru