PUBLISHABLE PAPER RELATED TO FPGA!

Symon wrote:
> i THINK IT SHOULD BE A m�BIUS STRIP fpga. sPECIFICALLY, A fpga SHAPED LIKE A 
> m�BIUS STRIP. tO BE PRECISE, A TWO DIMENSIONAL kLEIN BOTTLE. i URGE YOU TO 
> UPDATE YOUR UNDERSTANDING OF MY CLEAR AND ACCCURATE ADVICE.
> hth< YOURS 7TC< sYMSX 

This _really_ cracked me up. I'm still laughing...

-Dave


-- 
David Ashley                http://www.xdr.com/dash
Embedded linux, device drivers, system architecture

On 27 Sep 2006 01:46:33 +0200, "Symon" <symon_brewer@hotmail.com>
wrote:

>"jacko" <jackokring@gmail.com> wrote in message 
>news:1159302368.009079.245040@k70g2000cwa.googlegroups.com...
>>
>> solo wrote:
>>> I am searching for a new topic related to FPGAs and that is
>>> publishable?
>>> Any ideas?
>>> I was thinking of area, performance, speed and interconnection
>>> optimization. Please provide me with some interesting ideas and I will
>>> do the rest of the work.
>>> Thanks!
>>
>> how about single inline fpga which use veroboard spacing, and can be
>> broken off at one pin intervals.
>>
>> place 4 pins in prigrammer for power, clk, and program data, and then
>> break off to length specified by fpga compilier.
>>
>>
>> available in 1m strips maybe.
>>
>>
>> needs comparator for analog input, and as much logic in 1 pin segment
>> as possible.
>>
>>
>> flash on board prefered, with some 4 cycle dram too, for compactness.
>>
>>
>> is this the kind of thing u meant??
>>
>i THINK IT SHOULD BE A m&#4294967295;BIUS STRIP fpga. sPECIFICALLY, A fpga SHAPED LIKE A 
>m&#4294967295;BIUS STRIP. tO BE PRECISE, A TWO DIMENSIONAL kLEIN BOTTLE. i URGE YOU TO 
>UPDATE YOUR UNDERSTANDING OF MY CLEAR AND ACCCURATE ADVICE.
>hth< YOURS 7TC< sYMSX 

I have already patented this idea, whatever it is.  Please refer to
Pat. 23764598, "Eine Kleine Bottle/Nachtmusik."

Royalty payments are of course welcome.

Bob Perlman
Cambrian Design Works

Mr Peter,

I didnt like your reply:

First, all my ideas are interesting since i am related to the field of
software enginnering and i ignore the field where you come from!

Second, i didnt understand the impolite word "ass-backwards" that you
used and i wish that you keep those rude words for yourself and your
culture!

Third and most importantly, my statements are not arrogant at all! Your
reply to me seems that you want to revenge from someone and this is not
acceptable!

Hope you be more lineant and understanding when replying to people,
otherwise your replies are not interesting and will be rejected!

Thanks!

Peter Alfke wrote:
> We may have to teach Mr Solo some basic facts:
> First you must have an interesting idea or some valuable specific
> knowledge.
> Then, and only then, do you start writing an article.
> He seems to have this ass-backwards.
> Beyond that it might also be wise not to insult this newsgroup with
> arrogant statements about the lust for capitalization.
> Peter Alfke
> =============
> Todd Fleming wrote:
> > This gives a whole new meaning to the term "partial reconfiguration"
> >
> > Todd
> >
> > jacko wrote:
> > > how about single inline fpga which use veroboard spacing, and can be
> > > broken off at one pin intervals.
> > >
> > > place 4 pins in prigrammer for power, clk, and program data, and then
> > > break off to length specified by fpga compilier.
> > >
> > >
> > > available in 1m strips maybe.
> > >
> > >
> > > needs comparator for analog input, and as much logic in 1 pin segment
> > > as possible.
> > >
> > >
> > > flash on board prefered, with some 4 cycle dram too, for compactness.
> > > 
> > > 
> > > is this the kind of thing u meant??

>Hey Dave,

>Can you be more specific in your advice please?

It boils down to one thing.. Speed! ;)

Catch is that no fpga manufactor is willing publish specifications. I guess it
could be reverse engineered with some effort however. One quick route is to
use "meta fpga" in which you implement a fpga ontop of an physical fpga.

"Bob Perlman" <bobsrefusebin@hotmail.com> wrote in message 
news:mdjjh29ufai6ikj1045j31vrh9h9726onm@4ax.com...
> On 27 Sep 2006 01:46:33 +0200, "Symon" <symon_brewer@hotmail.com>
> wrote:
>
>>i THINK IT SHOULD BE A m&#4294967295;BIUS STRIP fpga. sPECIFICALLY, A fpga SHAPED LIKE 
>>A
>>m&#4294967295;BIUS STRIP. tO BE PRECISE, A TWO DIMENSIONAL kLEIN BOTTLE. i URGE YOU TO
>>UPDATE YOUR UNDERSTANDING OF MY CLEAR AND ACCCURATE ADVICE.
>>hth< YOURS 7TC< sYMSX
>
> I have already patented this idea, whatever it is.  Please refer to
> Pat. 23764598, "Eine Kleine Bottle/Nachtmusik."
>
> Royalty payments are of course welcome.
>
> Bob Perlman
> Cambrian Design Works
>
Mr. Bob,

I didnt like your patent: to me seems that you want to revenge from someone.

On examining it, although it seems that you know the expression of letters 
when addressing in the behavioral life, i noticed that your patent only is 
covering the clockwise twisted M&#4294967295;bius strip and this is not acceptable! I 
have now patented the anti-clockwise phenotype (Pat. 89546732) and i ignore 
the field where you come from! My idea will dominate the culture south of 
the equator.

Hope you be more chiral and understanding when patenting your non-orientable 
ideas, otherwise your inventions are not interesting and will be rejected!

may you tell me how can i post my cv online?

Thanks!

Mr. Aoun,
*************
Alexandre Aoun
Computer Engineering Student
Mathaf Adlieh street - Beirut, Lebanon
Born 1983
*************
if you have anything to do with FPGA's or digital design you are 
welcome, but you need to know your place
it seems that you've been caught on the wrong foot here, so you have the 
chance to back off, read and learn, otherwise you'll become a clown in 
this newsgroup.
at the end of the day it's your choice.

Aurash

PS, and please stop imitating Yoda from Star Wars when you post 
messages, Syms is at least one order of magnitude better than you  ;-)

solo wrote:

>Mr Peter,
>
>I didnt like your reply:
>
>First, all my ideas are interesting since i am related to the field of
>software enginnering and i ignore the field where you come from!
>
>Second, i didnt understand the impolite word "ass-backwards" that you
>used and i wish that you keep those rude words for yourself and your
>culture!
>
>Third and most importantly, my statements are not arrogant at all! Your
>reply to me seems that you want to revenge from someone and this is not
>acceptable!
>
>Hope you be more lineant and understanding when replying to people,
>otherwise your replies are not interesting and will be rejected!
>
>Thanks!
>
>Peter Alfke wrote:
>  
>
>>We may have to teach Mr Solo some basic facts:
>>First you must have an interesting idea or some valuable specific
>>knowledge.
>>Then, and only then, do you start writing an article.
>>He seems to have this ass-backwards.
>>Beyond that it might also be wise not to insult this newsgroup with
>>arrogant statements about the lust for capitalization.
>>Peter Alfke
>>=============
>>Todd Fleming wrote:
>>    
>>
>>>This gives a whole new meaning to the term "partial reconfiguration"
>>>
>>>Todd
>>>
>>>jacko wrote:
>>>      
>>>
>>>>how about single inline fpga which use veroboard spacing, and can be
>>>>broken off at one pin intervals.
>>>>
>>>>place 4 pins in prigrammer for power, clk, and program data, and then
>>>>break off to length specified by fpga compilier.
>>>>
>>>>
>>>>available in 1m strips maybe.
>>>>
>>>>
>>>>needs comparator for analog input, and as much logic in 1 pin segment
>>>>as possible.
>>>>
>>>>
>>>>flash on board prefered, with some 4 cycle dram too, for compactness.
>>>>
>>>>
>>>>is this the kind of thing u meant??
>>>>        
>>>>
>
>  
>


-- 
 __
/ /\/\ Aurelian Lazarut
\ \  / System Verification Engineer
/ /  \ Xilinx Ireland
\_\/\/
 
phone:	353 01 4032639
fax:	353 01 4640324
    
     

Dang! I knew I should have patented the process of patenting subsets of
mathematics!

Todd

A: Complaining about bottom-up posting in a bottom-up post!
Q: What is worse than complaining about bottom-up posting?

Symon wrote:
> "Bob Perlman" <bobsrefusebin@hotmail.com> wrote in message
> news:mdjjh29ufai6ikj1045j31vrh9h9726onm@4ax.com...
> > On 27 Sep 2006 01:46:33 +0200, "Symon" <symon_brewer@hotmail.com>
> > wrote:
> >
> >>i THINK IT SHOULD BE A m=F6BIUS STRIP fpga. sPECIFICALLY, A fpga SHAPED=
 LIKE
> >>A
> >>m=F6BIUS STRIP. tO BE PRECISE, A TWO DIMENSIONAL kLEIN BOTTLE. i URGE Y=
OU TO
> >>UPDATE YOUR UNDERSTANDING OF MY CLEAR AND ACCCURATE ADVICE.
> >>hth< YOURS 7TC< sYMSX
> >
> > I have already patented this idea, whatever it is.  Please refer to
> > Pat. 23764598, "Eine Kleine Bottle/Nachtmusik."
> >
> > Royalty payments are of course welcome.
> >
> > Bob Perlman
> > Cambrian Design Works
> >
> Mr. Bob,
>
> I didnt like your patent: to me seems that you want to revenge from someo=
ne.
>
> On examining it, although it seems that you know the expression of letters
> when addressing in the behavioral life, i noticed that your patent only is
> covering the clockwise twisted M=F6bius strip and this is not acceptable!=
 I
> have now patented the anti-clockwise phenotype (Pat. 89546732) and i igno=
re
> the field where you come from! My idea will dominate the culture south of
> the equator.
>
> Hope you be more chiral and understanding when patenting your non-orienta=
ble
> ideas, otherwise your inventions are not interesting and will be rejected!
>=20
> may you tell me how can i post my cv online?
>=20
> Thanks!

solo,

I've tried to be tolerant of your excess.  I appreciate the fact that 
you don't cross-post to other newsgroups but beyond that you come across 
as very annoying, like a bee at a picnic.

All your ideas are amazing.  To you.
Others ideas are not so interesting.  To you.

Open your mind and your eyes to the people and ideas in this newsgroup 
and try to "play well with others" while you're here.  Think of how you 
would interact sitting at a table with several engineers.  When you lose 
the respect of those who would otherwise be willing to contribute to 
your knowledge and help nurture your ideas, you lose.

You lost my respect almost immediately when you insisted that you can do 
whatever the heck you want with all-caps.  You chose to continue what 
you were doing even though it was pointed out that it appeared offensive 
to others.  It went downhill from there.

Please, be aware of how your communications might be misperceived by the 
professionals on this newsgroup.  There is more to be gained from and 
more of this world than you and your ideas.

But feel free to learn nothing since continuing on that path will offer 
very little knowledge from the others who could otherwise add to it.

- John_H

oh, and - Thanks!



solo wrote:
> Mr Peter,
> 
> I didnt like your reply:
> 
> First, all my ideas are interesting since i am related to the field of
> software enginnering and i ignore the field where you come from!
> 
> Second, i didnt understand the impolite word "ass-backwards" that you
> used and i wish that you keep those rude words for yourself and your
> culture!
> 
> Third and most importantly, my statements are not arrogant at all! Your
> reply to me seems that you want to revenge from someone and this is not
> acceptable!
> 
> Hope you be more lineant and understanding when replying to people,
> otherwise your replies are not interesting and will be rejected!
> 
> Thanks!

Symon wrote:
> "Bob Perlman" <bobsrefusebin@hotmail.com> wrote in message
> news:mdjjh29ufai6ikj1045j31vrh9h9726onm@4ax.com...
> > On 27 Sep 2006 01:46:33 +0200, "Symon" <symon_brewer@hotmail.com>
> > wrote:
> >
> >>i THINK IT SHOULD BE A m=F6BIUS STRIP fpga. sPECIFICALLY, A fpga SHAPED=
 LIKE
> >>A
> >>m=F6BIUS STRIP. tO BE PRECISE, A TWO DIMENSIONAL kLEIN BOTTLE. i URGE Y=
OU TO
> >>UPDATE YOUR UNDERSTANDING OF MY CLEAR AND ACCCURATE ADVICE.
> >>hth< YOURS 7TC< sYMSX
> >
> > I have already patented this idea, whatever it is.  Please refer to
> > Pat. 23764598, "Eine Kleine Bottle/Nachtmusik."
> >
> > Royalty payments are of course welcome.
> >
> > Bob Perlman
> > Cambrian Design Works
> >
> Mr. Bob,
>
> I didnt like your patent: to me seems that you want to revenge from someo=
ne.
>
> On examining it, although it seems that you know the expression of letters
> when addressing in the behavioral life, i noticed that your patent only is
> covering the clockwise twisted M=F6bius strip and this is not acceptable!=
 I
> have now patented the anti-clockwise phenotype (Pat. 89546732) and i igno=
re
> the field where you come from! My idea will dominate the culture south of
> the equator.
>
> Hope you be more chiral and understanding when patenting your non-orienta=
ble
> ideas, otherwise your inventions are not interesting and will be rejected!
>
> may you tell me how can i post my cv online?
>
> Thanks!

Stop this already, some of us are not going to get much work done today
if you keep this up.

Now I have to go clean myself up:)

John Jakson
transputer guy

> Stop this already, some of us are not going to get much work done today
> if you keep this up.
>
> Now I have to go clean myself up:)
>
> John Jakson
> transputer guy

I hope you used the new m=F6bius strip wipes that come packaged in a
four-dimensional Klein bottle for a never-ending supply!

Todd