virtex-5 sysmon, really nice to monitor supply and temp

Hi

the sysmon is really available in ALL Virtex-5 devices
below is voltage and temperature monitoring log screenshot from
Chipscope

http://www.xilant.com/downloads/cs82_sysmon.jpg

the temperature drops seen in the log are my finger pressed to the top
of the Virtex-5 package

Antti

Antti wrote:
> Hi
> 
> the sysmon is really available in ALL Virtex-5 devices
> below is voltage and temperature monitoring log screenshot from
> Chipscope
> 
> http://www.xilant.com/downloads/cs82_sysmon.jpg
> 
> the temperature drops seen in the log are my finger pressed to the top
> of the Virtex-5 package

So, was this doing anything, or is that just self-heating gets it
to +28'C above ambient ?

-jg

Jim Granville schrieb:

> Antti wrote:
> > Hi
> >
> > the sysmon is really available in ALL Virtex-5 devices
> > below is voltage and temperature monitoring log screenshot from
> > Chipscope
> >
> > http://www.xilant.com/downloads/cs82_sysmon.jpg
> >
> > the temperature drops seen in the log are my finger pressed to the top
> > of the Virtex-5 package
>
> So, was this doing anything, or is that just self-heating gets it
> to +28'C above ambient ?
>
> -jg

it had the ML501 reference design loaded. You can look at the ref
design manuals at Xilinx website to see what stuff is all included. the
LX50 is 38% full

Antti