Hey All... Is there a way to decode the interconnect/Routing algorithm used by Xilinx???? I see that the XDL file gives information on the routing details. However, the interconnect/Routing details are given as numbers. Also, It gives info on PIPs, but I really dunno how to decode it. Could somebody help me out..... Thanx in advance! Mr.B
Xilinx Interconnects/Routing
Started by ●February 2, 2007
Reply by ●February 3, 20072007-02-03
On 2=D4=C23=C8=D5, =C9=CF=CE=E75=CA=B150=B7=D6, bharadwaj...@gmail.com wrot= e:> Hey All... > > Is there a way to decode the interconnect/Routing algorithm used by > Xilinx???? I see that the XDL file gives information on the routing > details. However, the interconnect/Routing details are given as > numbers. Also, > It gives info on PIPs, but I really dunno how to decode it. Could > somebody help me out..... > > Thanx in advance! > > Mr.BI want to know it too.
Reply by ●February 3, 20072007-02-03
This is a very complicated subject, with many hundred man-years of development behind it. Tell us: Why do you want to know, or why do you need to know? Peter Alfke, Xilinx On Feb 2, 10:02=C2=A0pm, "2mao" <zhouh...@gmail.com> wrote:> On 2=E6=9C=883=E6=97=A5, =E4=B8=8A=E5=8D=885=E6=97=B650=E5=88=86, bharadw=aj...@gmail.com wrote:> > > Hey All... > > > Is there a way to decode the interconnect/Routing algorithm used by > > Xilinx???? =C2=A0I see that the XDL file gives information on the routi=ng> > details. However, the interconnect/Routing details are given as > > numbers. Also, > > It gives info on PIPs, but I really dunno how to decode it. Could > > somebody help me out..... > > > Thanx in advance! > > > Mr.B > > I want to know it too.
Reply by ●February 3, 20072007-02-03
On Feb 3, 1:17 am, "Peter Alfke" <a...@sbcglobal.net> wrote:> This is a very complicated subject, with many hundred man-years of > development behind it. > Tell us: > Why do you want to know, or why do you need to know? > Peter Alfke, Xilinx > > On Feb 2, 10:02 pm, "2mao" <zhouh...@gmail.com> wrote: > > > On 2=E6=9C=883=E6=97=A5, =E4=B8=8A=E5=8D=885=E6=97=B650=E5=88=86, bhara=dwaj...@gmail.com wrote:> > > > Hey All... > > > > Is there a way to decode the interconnect/Routing algorithm used by > > > Xilinx???? I see that the XDL file gives information on the routing > > > details. However, the interconnect/Routing details are given as > > > numbers. Also, > > > It gives info on PIPs, but I really dunno how to decode it. Could > > > somebody help me out..... > > > > Thanx in advance! > > > > Mr.B > > > I want to know it too.I know It is way too complicated..... :-) I am working on partial reconfiguration ryte now....my prof wanted me to dig deep dwn into it......if I get to know abt the routing details, I may b able to work on different benchmark ckts.... Thank you pete..... Mr.B
Reply by ●February 3, 20072007-02-03
On Feb 3, 5:20 pm, "Mr B" <bharadwaj...@gmail.com> wrote:> On Feb 3, 1:17 am, "Peter Alfke" <a...@sbcglobal.net> wrote: > > > > > This is a very complicated subject, with many hundred man-years of > > development behind it. > > Tell us: > > Why do you want to know, or why do you need to know? > > Peter Alfke, Xilinx > > > On Feb 2, 10:02 pm, "2mao" <zhouh...@gmail.com> wrote: > > > > On 2=E6=9C=883=E6=97=A5, =E4=B8=8A=E5=8D=885=E6=97=B650=E5=88=86, bha=radwaj...@gmail.com wrote:> > > > > Hey All... > > > > > Is there a way to decode the interconnect/Routing algorithm used by > > > > Xilinx???? I see that the XDL file gives information on the routing > > > > details. However, the interconnect/Routing details are given as > > > > numbers. Also, > > > > It gives info on PIPs, but I really dunno how to decode it. Could > > > > somebody help me out..... > > > > > Thanx in advance! > > > > > Mr.B > > > > I want to know it too. > > I know It is way too complicated..... :-) I am working on partial > reconfiguration ryte now....my prof wanted me to dig deep dwn into > it......if I get to know abt the routing details, I may b able to work > on different benchmark ckts.... > > Thank you pete..... > > Mr.BHey Pete... Could u plz tel me watz happening wid the XDL file.... Thanks in Advance Mr.B
Reply by ●February 3, 20072007-02-03
Well, it's polite enough, but look at that spelling... What did I spend 20 years in school for? Peter =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D On Feb 3, 5:27=C2=A0pm, "Mr B" <bharadwaj...@gmail.com> wrote:> On Feb 3, 5:20 pm, "Mr B" <bharadwaj...@gmail.com> wrote: > > > > > On Feb 3, 1:17 am, "Peter Alfke" <a...@sbcglobal.net> wrote: > > > > This is a very complicated subject, with many hundred man-years of > > > development behind it. > > > Tell us: > > > Why do you want to know, or why do you need to know? > > > Peter Alfke, Xilinx > > > > On Feb 2, 10:02 pm, "2mao" <zhouh...@gmail.com> wrote: > > > > > On 2=E6=9C=883=E6=97=A5, =E4=B8=8A=E5=8D=885=E6=97=B650=E5=88=86, b=haradwaj...@gmail.com wrote:> > > > > > Hey All... > > > > > > Is there a way to decode the interconnect/Routing algorithm used =by> > > > > Xilinx???? =C2=A0I see that the XDL file gives information on the=routing> > > > > details. However, the interconnect/Routing details are given as > > > > > numbers. Also, > > > > > It gives info on PIPs, but I really dunno how to decode it. Could > > > > > somebody help me out..... > > > > > > Thanx in advance! > > > > > > Mr.B > > > > > I want to know it too. > > > I know It is way too complicated..... :-) I am working on partial > > reconfiguration ryte now....my prof wanted me to dig deep dwn into > > it......if I get to know abt the routing details, I may b able to work > > on different benchmark ckts.... > > > Thank you pete..... > > > Mr.B > > Hey Pete... > > Could u plz tel me watz happening wid the XDL file.... > > Thanks in Advance > > Mr.B
Reply by ●February 4, 20072007-02-04
Reply by ●February 4, 20072007-02-04
On Feb 4, 4:04 pm, "jbnote" <jbn...@gmail.com> wrote:> > Well, it's polite enough, but look at that spelling... > > You're so old skool, Peter. > > JBHey all, Lets not keep arguing abt the spellings and other stuffs in here. No offence JB!!!!!! Lets learn something. Anyways, I am sorry if I was disrespectful to anyone. Please let us know something about the routing details(If at all someone knew). Mr.B
Reply by ●February 4, 20072007-02-04
Yes I am, and proud of it :-) Somebody has to hold up the banner of this language, even if it takes an immigrant to do it ! Peter ============= On Feb 4, 2:04 pm, "jbnote" <jbn...@gmail.com> wrote:> > Well, it's polite enough, but look at that spelling... > > You're so old skool, Peter. > > JB
Reply by ●February 4, 20072007-02-04
On Feb 4, 2:16 pm, "Mr B" <bharadwaj...@gmail.com> wrote:> On Feb 4, 4:04 pm, "jbnote" <jbn...@gmail.com> wrote: > > > > Well, it's polite enough, but look at that spelling...As I mentioned before, the routing structure is the result of over a thousand man-years of development effort, not something that is easily explained on a newsgroup. But the real question had to do with partial reconfiguration, and I will dig up a few references to that. Peter ==============> > You're so old skool, Peter. > > > JB > > Hey all, > > Lets not keep arguing abt the spellings and other stuffs in here. No > offence JB!!!!!! Lets learn something. Anyways, I am sorry if I was > disrespectful to anyone. Please let us know something about the > routing details(If at all someone knew). > > Mr.B
