Hello All, In my project some RF input from outside circuitry has to be converted into digital form in ADC and then, after processing in FPGA, it will be converted back into analog RF signal which is to be displayed on an oscilloscope. Hence, I am interested - how to connect BNC connectors to ADC and DAC present on Xilinx Spartan-3E 1600E Microblaze Development Board? Thank you.
How to connect two BNC connectors to FPGA board?
Started by ●January 24, 2010
Reply by ●January 24, 20102010-01-24
On Jan 24, 10:08=A0am, Alex <vict...@gmail.com> wrote:> Hello All, > > In my project some RF input from outside circuitry has to be converted > into digital form in ADC and then, after processing in FPGA, it will > be converted back into analog RF signal which is to be displayed on an > oscilloscope. > > Hence, I am interested - how to connect BNC connectors to ADC and DAC > present on Xilinx Spartan-3E 1600E Microblaze Development Board? > > Thank you.You can use Digilent BNC connector. Xilinx Spartan-3E 1600E Microblaze Development Board has appropriate 6 pin connectors. http://www.digilentinc.com/Products/Detail.cfm?NavPath=3D2,401,541&Prod=3DP= MOD-CON2
Reply by ●January 24, 20102010-01-24
On 24 =D1=8F=D0=BD=D0=B2, 11:58, Din=C3=A7ay Ak=C3=A7=C3=B6ren <din...@gmai= l.com> wrote:> On Jan 24, 10:08=C2=A0am, Alex <vict...@gmail.com> wrote: > > > Hello All, > > > In my project some RF input from outside circuitry has to be converted > > into digital form in ADC and then, after processing in FPGA, it will > > be converted back into analog RF signal which is to be displayed on an > > oscilloscope. > > > Hence, I am interested - how to connect BNC connectors to ADC and DAC > > present on Xilinx Spartan-3E 1600E Microblaze Development Board? > > > Thank you. > > You can use Digilent BNC connector. Xilinx Spartan-3E 1600E Microblaze > Development Board has appropriate 6 pin connectors.http://www.digilentinc=.com/Products/Detail.cfm?NavPath=3D2,401,541&Prod... Thank you for helpful reply!
Reply by ●January 24, 20102010-01-24
Anyway I have noticed that the both - Digilent Pmod BNC connector and J5 header (which is used for DAC on Xilinx 1600E Microblaze development kit) are actually male pin connectors - so how to connect them?! I am puzzled.
Reply by ●January 24, 20102010-01-24
On Jan 24, 5:28=A0am, Alex <vict...@gmail.com> wrote:> Anyway I have noticed that the both - Digilent Pmod BNC connector and > J5 header (which is used for DAC on Xilinx 1600E Microblaze > development kit) are actually male pin connectors - so how to connect > them?! I am puzzled.They come with a cable that has the female connectors at both ends. Regards, John McCaskill www.FasterTechnology.com
Reply by ●January 24, 20102010-01-24
On 24 =D1=8F=D0=BD=D0=B2, 16:18, John McCaskill <jhmccask...@gmail.com> wro= te:> On Jan 24, 5:28=C2=A0am, Alex <vict...@gmail.com> wrote: > > > Anyway I have noticed that the both - Digilent Pmod BNC connector and > > J5 header (which is used for DAC on Xilinx 1600E Microblaze > > development kit) are actually male pin connectors - so how to connect > > them?! I am puzzled. > > They come with a cable that has the female connectors at both ends. > > Regards, > > John McCaskillwww.FasterTechnology.comagh.. silly me (thanks anyway!)
