Hi,
I am trying a design that is from ISE 9.2 on the latest 12.4 using
CentOS 64 bit and receive the following error, I can't find anything
on Xilinx that refers to it.
Anyone seen the same and know a solution?
INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes
peeked
does not match number of bytes requested. Corrupted file?
FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX
for PM
base Process will terminate. For technical support on this issue,
please
open a WebCase with this project attached at
http://www.xilinx.com/support.
Release 12.4 - Map M.81d (lin64)
/michael
ISE 12.4
Started by ●January 26, 2011
Reply by ●January 26, 20112011-01-26
>Hi, > >I am trying a design that is from ISE 9.2 on the latest 12.4 using >CentOS 64 bit and receive the following error, I can't find anything >on Xilinx that refers to it. > >Anyone seen the same and know a solution? > > > >INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >peeked > does not match number of bytes requested. Corrupted file? >INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >peeked > does not match number of bytes requested. Corrupted file? >FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX >for PM > base Process will terminate. For technical support on this issue, >please > open a WebCase with this project attached at >http://www.xilinx.com/support. >Release 12.4 - Map M.81d (lin64) > > >/michael >Is "CentOS 64bit" a supported operating system for ISE 12.4? You could try opening a WebCase for it at http://www.xilinx.com/support, unless you are a student, in which case I suspect your supervisor has to do it. --------------------------------------- Posted through http://www.FPGARelated.com
Reply by ●January 26, 20112011-01-26
On Jan 26, 4:56=A0am, Michael <michael_laaja...@yahoo.com> wrote:> Hi, > > I am trying a design that is from ISE 9.2 on the latest 12.4 using > CentOS 64 bit and receive the following error, I can't find anything > on Xilinx that refers to it. > > Anyone seen the same and know a solution? > > INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes > peeked > =A0 =A0 does not match number of bytes requested. =A0Corrupted file? > INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes > peeked > =A0 =A0 does not match number of bytes requested. =A0Corrupted file? > FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX > for PM > =A0 =A0 base =A0 Process will terminate. For technical support on this is=sue,> please > =A0 =A0 open a WebCase with this project attached athttp://www.xilinx.com=/support.> Release 12.4 - Map M.81d (lin64) > > /michaelDid you translate the project or start a new one fresh? I have seen poor results translating ("upgrading") projects. The error sounds like a "unix EOL vs/ DOS EOL" type of problem. Was the 9.2 project created in Windows? CentOS is so similar to Fedora that I would not be looking at OS issues; odds are it is an ISE issue. Do you have access to 9.2 on Linux? That might be an interesting test. (Or 12.4 on Windows...) Another question is "Why are you changing ISE versions?" I am seeing less than stellar results with version 12 (or version 11 for that matter). $.02, G.
Reply by ●January 26, 20112011-01-26
Hi, On 01/26/11 07:30 PM, ghelbig wrote:> On Jan 26, 4:56 am, Michael<michael_laaja...@yahoo.com> wrote: >> Hi, >> >> I am trying a design that is from ISE 9.2 on the latest 12.4 using >> CentOS 64 bit and receive the following error, I can't find anything >> on Xilinx that refers to it. >> >> Anyone seen the same and know a solution? >> >> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >> peeked >> does not match number of bytes requested. Corrupted file? >> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >> peeked >> does not match number of bytes requested. Corrupted file? >> FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX >> for PM >> base Process will terminate. For technical support on this issue, >> please >> open a WebCase with this project attached athttp://www.xilinx.com/support. >> Release 12.4 - Map M.81d (lin64) >> >> /michael > > Did you translate the project or start a new one fresh? I have seen > poor results translating ("upgrading") projects.Its an old projekt no ISE using a Makesystem so no GUI.> > The error sounds like a "unix EOL vs/ DOS EOL" type of problem. Was > the 9.2 project created in Windows?No on Solaris> > CentOS is so similar to Fedora that I would not be looking at OS > issues; odds are it is an ISE issue. >Correct.> Do you have access to 9.2 on Linux? That might be an interesting > test. (Or 12.4 on Windows...) >Yes, runs fine.> Another question is "Why are you changing ISE versions?" I am seeing > less than stellar results with version 12 (or version 11 for that > matter). > > $.02, > G.I agree with you to not change ISE version thats why we are still on 9.2 and Solaris which is rocksolid, cant say they same for the GUIs on Linux, they really suck. But the reason is a test to see if we can gain something from performance point of view(speed) /michael
Reply by ●January 26, 20112011-01-26
Hi, On 01/26/11 02:53 PM, RCIngham wrote:>> Hi, >> >> I am trying a design that is from ISE 9.2 on the latest 12.4 using >> CentOS 64 bit and receive the following error, I can't find anything >> on Xilinx that refers to it. >> >> Anyone seen the same and know a solution? >> >> >> >> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >> peeked >> does not match number of bytes requested. Corrupted file? >> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >> peeked >> does not match number of bytes requested. Corrupted file? >> FATAL_ERROR:NgdBuild:basnbbuspin.c:87:1.20 - Empty or missing BUS_SYNTAX >> for PM >> base Process will terminate. For technical support on this issue, >> please >> open a WebCase with this project attached at >> http://www.xilinx.com/support. >> Release 12.4 - Map M.81d (lin64) >> >> >> /michael >> > > Is "CentOS 64bit" a supported operating system for ISE 12.4?No, but RH is and its as close as it gets.> > You could try opening a WebCase for it at http://www.xilinx.com/support, > unless you are a student, in which case I suspect your supervisor has to do > it. > > > --------------------------------------- > Posted through http://www.FPGARelated.comYes thats done, and Xilinx has responded very promptly :) /michael
Reply by ●January 27, 20112011-01-27
Whenever I see internal tool errors like that I first suspect a quota/full disk type problem. --steve "Michael" <michael_laajanen@yahoo.com> wrote in message news:8qajvpF1l4U1@mid.individual.net...> Hi, > > I am trying a design that is from ISE 9.2 on the latest 12.4 using CentOS > 64 bit and receive the following error, I can't find anything > on Xilinx that refers to it. > > Anyone seen the same and know a solution? > > > > INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes > peeked > does not match number of bytes requested. Corrupted file?
Reply by ●January 27, 20112011-01-27
Hi, On 01/27/11 07:47 PM, Steve Ravet wrote:> Whenever I see internal tool errors like that I first suspect a quota/full > disk type problem. > > --steve >Dont top post on Usenet. http://www.caliburn.nl/topposting.html Then you should have a better control of your server I think and keep track of usage per day or so. There are tools that can monitor diskuage and alert when you are reaching a critical level.> > "Michael"<michael_laajanen@yahoo.com> wrote in message > news:8qajvpF1l4U1@mid.individual.net... >> Hi, >> >> I am trying a design that is from ISE 9.2 on the latest 12.4 using CentOS >> 64 bit and receive the following error, I can't find anything >> on Xilinx that refers to it. >> >> Anyone seen the same and know a solution? >> >> >> >> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >> peeked >> does not match number of bytes requested. Corrupted file? > >/michael
Reply by ●January 28, 20112011-01-28
Thanks for the suggestions Michael. The point is that when ISE runs out of disk space it does not, in my experience, say "no space available on device" or something like that. It usually says something like "internal error". --steve "Michael" <michael_laajanen@yahoo.com> wrote in message news:8qe1ohF3lmU1@mid.individual.net...> Dont top post on Usenet. http://www.caliburn.nl/topposting.html > > Then you should have a better control of your server I think and keep > track of usage per day or so. > > There are tools that can monitor diskuage and alert when you are reaching > a critical level.
Reply by ●March 3, 20112011-03-03
Hi, On 01/27/11 09:09 PM, Michael wrote:> Hi, > > On 01/27/11 07:47 PM, Steve Ravet wrote: >> Whenever I see internal tool errors like that I first suspect a >> quota/full >> disk type problem. >> >> --steve >> > Dont top post on Usenet. http://www.caliburn.nl/topposting.html > > Then you should have a better control of your server I think and keep > track of usage per day or so. > > There are tools that can monitor diskuage and alert when you are > reaching a critical level. > > >> >> "Michael"<michael_laajanen@yahoo.com> wrote in message >> news:8qajvpF1l4U1@mid.individual.net... >>> Hi, >>> >>> I am trying a design that is from ISE 9.2 on the latest 12.4 using >>> CentOS >>> 64 bit and receive the following error, I can't find anything >>> on Xilinx that refers to it. >>> >>> Anyone seen the same and know a solution? >>> >>> >>> >>> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >>> peeked >>> does not match number of bytes requested. Corrupted file? >> >> > > /michaelJust an update. CentOS is not supported and does not seam to run on IS 12.4 sadly. 9.2 does! /michael
Reply by ●March 8, 20112011-03-08
Michael <michael_laajanen@yahoo.com> writes:>>>> I am trying a design that is from ISE 9.2 on the latest 12.4 using >>>> CentOS >>>> 64 bit and receive the following error, I can't find anything >>>> on Xilinx that refers to it. >>>> >>>> Anyone seen the same and know a solution? >>>> >>>> >>>> >>>> INTERNAL_ERROR:Portability:basutencodeimp.c:229:1.24 - Number of bytes >>>> peeked >>>> does not match number of bytes requested. Corrupted file? >>> >>> >> >> /michael> Just an update. CentOS is not supported and does not seam to run on IS > 12.4 sadly. 9.2 does!we have on our Servers CentOS (5.5), and ISE 12.4 works on it. Never saw your error, maybe its something in your design, that the new version no longer supports? http://www.xilinx.com/support/answers/32912.htm indicates that maybe some permissions are wrong (the link leads to a VISTA Problem, but it got exact the same error message). Florian
