ajholme@hotmail.com (Andrew Holme) wrote in message news:<966757eb.0407241646.48d695f6@posting.google.com>...
> I'm designing a CPLD using the block diagram / schematic editor in
> Quartus II Version 4.1 Web Edition.
>
> Does anyone know a way to export the block diagram as an image? As
> far as I can see, the only way is to take a screen shots or else print
> to file.
Two choices.
1. Get the screen image sized and shaped to suit your needs. Do a
print screen ten open wordpad and do a paste. You've got the screen
shot as an image file.
2. Get a PDF printer driver. Lots of shareware you can try before you
buy I use WIN2PDF. THe print to the pdf driver and you've got a pdf
file that you can view and print.
Good Luck
George
www.embedded-designer.com
Reply by Leon Heller●July 25, 20042004-07-25
"Subroto Datta" <sdatta@altera.com> wrote in message
news:okHMc.491$uC7.328@newssvr19.news.prodigy.com...
> Hi Andrew,
>
> Print to file is your best bet. Exporting the block diagram as an image
> is not available at the present time. I will pass this request on to the
> right folks.
Windows Metafile would be useful. It can them be pasted into a document and
will scale nicely. The Pulsonix PCB software I use has this facility.
Leon
Reply by Subroto Datta●July 25, 20042004-07-25
Hi Andrew,
Print to file is your best bet. Exporting the block diagram as an image
is not available at the present time. I will pass this request on to the
right folks.
- Subroto Datta
Altera Corp.
"Andrew Holme" <ajholme@hotmail.com> wrote in message
news:966757eb.0407241646.48d695f6@posting.google.com...
> I'm designing a CPLD using the block diagram / schematic editor in
> Quartus II Version 4.1 Web Edition.
>
> Does anyone know a way to export the block diagram as an image? As
> far as I can see, the only way is to take a screen shots or else print
> to file.
Reply by Andrew Holme●July 24, 20042004-07-24
I'm designing a CPLD using the block diagram / schematic editor in
Quartus II Version 4.1 Web Edition.
Does anyone know a way to export the block diagram as an image? As
far as I can see, the only way is to take a screen shots or else print
to file.