Reply by Burkhard Schermer●October 22, 20042004-10-22
I would like to share the following,
Lattice made available for me a new fixed version of the ISC BSDL file. With
it it's possible to program and re-program the Lattice CPLD via the Xilinx
parallel cable and WebPack (iMPACT).
Burkhard
"Burkhard Schermer" <bschermer@addcom.de> schrieb im Newsbeitrag
news:ckmnp5$4h6$03$1@news.t-online.com...
> Hi all,
> I tried to program a Lattice CPLD LC5512MB via the Xilinx parallel cable
> by using Xilinx iMPACT in batch mode with an ISC-file. The programming
> perfectly worked with an empty CPLD but if the CPLD already was programmed
> , strange things was happened - all Bits was programmed with zeros. It
> looks like as the ERASE OpCode in the LATTICE 1532-BSDL-file would not
> work.
> Does somebody know a solution?
>
> Thanks and regards
> Burkhard
>
Reply by Burkhard Schermer●October 14, 20042004-10-14
Hi all,
I tried to program a Lattice CPLD LC5512MB via the Xilinx parallel cable by
using Xilinx iMPACT in batch mode with an ISC-file. The programming
perfectly worked with an empty CPLD but if the CPLD already was programmed ,
strange things was happened - all Bits was programmed with zeros. It looks
like as the ERASE OpCode in the LATTICE 1532-BSDL-file would not work.
Does somebody know a solution?
Thanks and regards
Burkhard