"Brad Smallridge" <bradsmallridge@dslextreme.com> wrote in message
news:10pl8guj9m2qgb4@corp.supernews.com...
> I launch Modelsim from the Xilinx IDE. I would like it run all the
way
> through, to a wait; statement in the testbench. How do I do that?
In fact,
> since my testbed outputs to text files, I would rather not see the
ModelSim
> workings at all, and would rather just stay in the Xilinx IDE.
>
> Brad Smallridge
>
>
>
You can create a custom do file and tell ISE about that. Alternatively
if you just want to run to the end, replace the option that says "run
timevalue"
with "run -all". You can just put "run -all" in the dialogue box in
the
properties for the process in ISE that launches Modelsim,
regards
Alan
--
Alan Fitch
Consultant
DOULOS - Developing Design Know-how
VHDL * Verilog * SystemC * Perl * Tcl/Tk * Verification * Project
Services
Doulos Ltd. Church Hatch, 22 Market Place, Ringwood, Hampshire, BH24
1AW, UK
Tel: +44 (0)1425 471223 mail:
alan.fitch@doulos.com
Fax: +44 (0)1425 471573 Web:
http://www.doulos.com
The contents of this message may contain personal views which are not
the
views of Doulos Ltd., unless specifically stated.
Reply by Brad Smallridge●November 16, 20042004-11-16
I launch Modelsim from the Xilinx IDE. I would like it run all the way
through, to a wait; statement in the testbench. How do I do that? In fact,
since my testbed outputs to text files, I would rather not see the ModelSim
workings at all, and would rather just stay in the Xilinx IDE.
Brad Smallridge