>
> Hi all,
>
> I am wondering if there is any way to use my legacy Spartan XL devices with ISE/WebPack as the front end. Is there anything I can do, or would I have to fall back to the old ISE Classic/LeonardoSpectrum routine?
Yup, you are stuck with the "classic" tools for this part. The Spartan
(non II or 3) parts are based on the XC4000 family for which all support
is dropped in the new tools. They only support the Virtex like devices
and derivatives.
--
Rick "rickman" Collins
rick.collins@XYarius.com
Ignore the reply address. To email me use the above address with the XY
removed.
Arius - A Signal Processing Solutions Company
Specializing in DSP and FPGA design URL http://www.arius.com
4 King Ave 301-682-7772 Voice
Frederick, MD 21701-3110 301-682-7666 FAX
Reply by Vadim Vaynerman●December 4, 20042004-12-04
Hi all,
I am wondering if there is any way to use my legacy Spartan XL devices with ISE/WebPack as the front end. Is there anything I can do, or would I have to fall back to the old ISE Classic/LeonardoSpectrum routine?
Thanks, Vadim