Thank you Bertrand. I have successfully started EDK under linux .
Reply by Bertrand Rousseau●February 9, 20052005-02-09
Hello,
Actually I don't know where you put EDK. For example I put mine in
~/bin/EDK and I have also some xilinx stuff in ~/bin/xilinx.
To use XPS I first start a terminal and I switch to csh by typing:
bertrand@seraphin:~/bin/EDK $ csh
seraphin:~/bin/EDK>
Then I have to source 2 configuration files (one from xilinx, the other
from EDK):
seraphin:~/bin/EDK> source ~/bin/xilinx/setting.csh
seraphin:~/bin/EDK> source ~/bin/EDK/setup.csh
Note: I had to modify this last file as it was using bash syntax and
not csh syntax. It now looks like this:
setenv XILINX_EDK /home/bertrand/bin/EDK
setenv LD_LIBRARY_PATH ${XILINX_EDK}/bin/lin:${LD_LIBRARY_PATH}
setenv PATH
${XILINX_EDK}/bin/lin:${XILINX_EDK}/gnu/microblaze/lin/bin:${XILINX_EDK}/gnu/powerpc-eabi/lin/bin:${PATH}
Then I just need to start XPS by doing:
seraphin:~/bin/EDK> XPS_GUI
If your X server allows TCP connections it should work.
Hope it helps.
Bertrand
PS: Actually I also modified csh configuration files so that it loads
automatically the 2 config files above when I start it. I have a
.tcshrc file in my home directory containing:
source ~/bin/xilinx/settings.csh
source ~/bin/EDK/setup.csh
Reply by Ram●February 9, 20052005-02-09
Hello, This is a beginner question. I have EDK 6.3 installed in a linux
system. I dont know how to start the EDK/XPS and begin with Base system
builder. can anybody help me . thank you