"Jeffsen" <xjf77@yahoo.(dot)com> schrieb im Newsbeitrag
news:ee8bbd0.-1@webx.sUN8CHnE...
> Dear all, I have a Xilinx-ML300 at hand,and want to test the Gemac core by
connect FPGA with PC via Gigabit-Ethernet. The problem is on ML300 the RJ45
connector is not for gigabit ethernet. There is optical fiber link avaiable
and also MultiGigabitTransceivers(MGTs) avaiable. One solution is using the
optical links. While another people told me to use MGT to implement the
gigabitEthernet? Is that possible? If yes,how? Shall I use both gemac and
MGT? Or only MGT? No idea about it? Any information is appreciated. Thanks
with regards!
www.xilinx.com
GSRD
xapp536.zip gigabit ref design for ML300
Antti
PS the ML300 optical things are nice but not sure if you have any other
equipment where to plug the optical fibre from them...
Reply by Jeffsen●February 10, 20052005-02-10
PS:email me by remove '(dot)' appeared. Thanks!
Reply by Jeffsen●February 10, 20052005-02-10
Dear all, I have a Xilinx-ML300 at hand,and want to test the Gemac core by connect FPGA with PC via Gigabit-Ethernet. The problem is on ML300 the RJ45 connector is not for gigabit ethernet. There is optical fiber link avaiable and also MultiGigabitTransceivers(MGTs) avaiable. One solution is using the optical links. While another people told me to use MGT to implement the gigabitEthernet? Is that possible? If yes,how? Shall I use both gemac and MGT? Or only MGT? No idea about it? Any information is appreciated. Thanks with regards!