appreciate.

the 70 cents quote was from a Xilinx distributor in taiwan. it took me
quite some effort to get this quote. So was wondering if someone has
already done this research, that would save me tons of time.

thanks again

governer@gmail.com wrote:
> Hi all
> Does anyone know what is the cheapest 3.3V CPLD available?
> My desing uses 31 macrocells, and 33 I/O. Currently using Xilinx
> XC9536XL available for around US$0.70 a piece (for 100k quantities).
> The design is pretty slow GCK~2MHz. I need 100k+ quantities.
> Thanks
> ZK

Look also at the Lattice ispMACH4032, and the Atmel ATF1502ASV,
and maybe Coolrunner but the pure 3.3V may be a problem...
-jg

governer@gmail.com wrote:
> Hi all
> Does anyone know what is the cheapest 3.3V CPLD available?
> My desing uses 31 macrocells, and 33 I/O. Currently using Xilinx
> XC9536XL available for around US$0.70 a piece (for 100k quantities).
> The design is pretty slow GCK~2MHz. I need 100k+ quantities.

You definitely should be asking distribution on this, not a newsgroup. 
Distribution will work hard to get you good quotes and will compete 
against their competitors.  But I will say that $0.70 is a pretty good 
price.  Also, most CPLDs are in multiples of 16, so you may have to bump 
up to a 48 or 64 macrocell device which might not be competitive.

I believe Lattice (or was it Actel) has some new parts coming out that 
are very price competitive, but they may all be larger than you want. 
Like I said, $0.70 might be hard to beat.

Hi all
Does anyone know what is the cheapest 3.3V CPLD available?
My desing uses 31 macrocells, and 33 I/O. Currently using Xilinx
XC9536XL available for around US$0.70 a piece (for 100k quantities).
The design is pretty slow GCK~2MHz. I need 100k+ quantities.
Thanks
ZK