> Hi,
> Yeah if any body has any idea of how this thing can be done please
> share your views.I am stuck at this point and cannot proceed till i
> solve this problem of getting data into microblaze from outside(say
> using UART).
> Thanx.
>
> Herb T wrote:
>
>>Dan Henry wrote:
>>
>>>kittyawake@gmail.com wrote:
>>
>>Hi Dan,
>>Can you give us some more specific details how to do it (or anyone
>
> that
>
>>knows ;-)? It would be a great help.
>>Thanks,
>>-HT
>
>
Please don't top-post.
I have posted ideas in reply to Herb T.'s post.
--
Dan Henry
Reply by Dan Henry●April 19, 20052005-04-19
Herb T wrote:
>>kittyawake@gmail.com wrote:
>
> Hi Dan,
> Can you give us some more specific details how to do it (or anyone that
> knows ;-)? It would be a great help.
Instantiate a uartns550 or uartlite. Build with a software library at a
level appropriate for your needs. EDK will populate your project
directory with (for example) ../libsrc/uartlite_v1_00_b/src/..
containing library source code to perform UART transmit and receive.
The drivers are documented by the source code and in xilinx_drivers.pdf
in the EDK's doc directory.
--
Dan Henry
Reply by Frank van Eijkelenburg●April 19, 20052005-04-19
You can implement X-modem protocol in your code at the microblaze and
transfer datablocks with hyperterminal (or a better program: CRT). In these
programs you can choose to transfer a file by using the X-modem protocol. In
your program at the microblaze you only have to store the datablocks at the
right place...
Frank
<kittyawake@gmail.com> wrote in message
news:1113840801.505151.248480@z14g2000cwz.googlegroups.com...
> Hi,
> Yeah if any body has any idea of how this thing can be done please
> share your views.I am stuck at this point and cannot proceed till i
> solve this problem of getting data into microblaze from outside(say
> using UART).
> Thanx.
>
> Herb T wrote:
>> Dan Henry wrote:
>> > kittyawake@gmail.com wrote:
>>
>> Hi Dan,
>> Can you give us some more specific details how to do it (or anyone
> that
>> knows ;-)? It would be a great help.
>> Thanks,
>> -HT
>
Reply by ●April 18, 20052005-04-18
Hi,
Yeah if any body has any idea of how this thing can be done please
share your views.I am stuck at this point and cannot proceed till i
solve this problem of getting data into microblaze from outside(say
using UART).
Thanx.
Herb T wrote:
> Dan Henry wrote:
> > kittyawake@gmail.com wrote:
>
> Hi Dan,
> Can you give us some more specific details how to do it (or anyone
that
> knows ;-)? It would be a great help.
> Thanks,
> -HT
Reply by Herb T●April 17, 20052005-04-17
Dan Henry wrote:
> kittyawake@gmail.com wrote:
Hi Dan,
Can you give us some more specific details how to do it (or anyone that
knows ;-)? It would be a great help.
Thanks,
-HT
Reply by Dan Henry●April 16, 20052005-04-16
kittyawake@gmail.com wrote:
>hi,
> I want to input data from outside the board to the microblaze.can i
>do it using uart in my design?
Yes.
>Can i make this data come from the
>hyperterminal to the uart and from uart to microblaze?
Yes.
>In such a system
>what ever output microblaze sends outside the board can come on the
>hyperterminal.Can this output data go to a file?
Yes, HyperTerminal can capture to a file.
--
Dan Henry
Reply by ●April 15, 20052005-04-15
hi,
I want to input data from outside the board to the microblaze.can i
do it using uart in my design?Can i make this data come from the
hyperterminal to the uart and from uart to microblaze?In such a system
what ever output microblaze sends outside the board can come on the
hyperterminal.Can this output data go to a file?
Thanx