I am assuming you are in the US but Xilinx have 3 official distributors
there look here http://www.xilinx.com/company/sales/ww_disti.htm . There are
a few other places in the US that stock Spartan-3 that I have come across. A
web search will probably dredge those up.
Unfortunately, other than catalogue operations, a lot of distributors are
not interested in selling small numbers of parts. MOQs of hundreds or even
thousands are not now uncommon.
John Adair
Enterpoint Ltd. - Home Of Low Cost Spartan-3 Development Board MINI-CAN.
http://www.enterpoint.co.uk
"dlharmon" <harmon.darrell@gmail.com> wrote in message
news:1114799669.004339.239250@z14g2000cwz.googlegroups.com...
> I am currently doing work on a small board with a FPGA and DSP. I have
> been planning to use the Xilinx XC3S1000-4FT256C , but Nuhorizons
> doesn't seem too interested in selling me 2 for a prototype. Where
> else could I find these? The Xilinx online store only has parts up to
> the XC3S400. I have checked digikey, but they are a few years behind
> on the Xilinx parts.
>
> I may have to consider changing to Altera since Digikey seems to stock
> them. I really don't want to do this, but if forced by unavailability
> of parts I will have to.
>
> Darrell Harmon
> http://dlharmon.com
>
Reply by dlharmon●April 29, 20052005-04-29
I am currently doing work on a small board with a FPGA and DSP. I have
been planning to use the Xilinx XC3S1000-4FT256C , but Nuhorizons
doesn't seem too interested in selling me 2 for a prototype. Where
else could I find these? The Xilinx online store only has parts up to
the XC3S400. I have checked digikey, but they are a few years behind
on the Xilinx parts.
I may have to consider changing to Altera since Digikey seems to stock
them. I really don't want to do this, but if forced by unavailability
of parts I will have to.
Darrell Harmon
http://dlharmon.com