...much appreciated!
Cheers
Tim
--
"Linux... because rebooting is for adding new hardware!"
http://home.swiftdsl.com.au/~tmccoy
MSN: timsy_01@hotmail.com
ICQ: 160341067
Reply by Leon Heller●June 6, 20052005-06-06
"gallen" <arlencox@gmail.com> wrote in message
news:1118040696.932870.241010@f14g2000cwb.googlegroups.com...
> As far as I know there are no plans to release a ModelSim XE starter
> for Linux. Most folks use command line simulators and GTKwave.
>
> Icarus Verilog is the most popular Verilog sim.
> http://www.icarus.com/eda/verilog/
>
> GHDL is probably the most popular VHDL sim. http://ghdl.free.fr/
>
> GPL-Cver is also good from what I hear (Verilog).
> http://www.pragmatic-c.com/gpl-cver/
>
> Of course if you have money to burn, commercial sims will give you
> better performance and (arguably) a better UI than GTKwave, but I'm
> guessing you're not looking for commercial so the above should do the
> trick.
As far as I know there are no plans to release a ModelSim XE starter
for Linux. Most folks use command line simulators and GTKwave.
Icarus Verilog is the most popular Verilog sim.
http://www.icarus.com/eda/verilog/
GHDL is probably the most popular VHDL sim. http://ghdl.free.fr/
GPL-Cver is also good from what I hear (Verilog).
http://www.pragmatic-c.com/gpl-cver/
Of course if you have money to burn, commercial sims will give you
better performance and (arguably) a better UI than GTKwave, but I'm
guessing you're not looking for commercial so the above should do the
trick.
Good luck,
Arlen
Reply by Tim McCoy●June 5, 20052005-06-05
Hi all,
I'm happy to see Xilinx is releasing their WebPack for Linux, and with a
couple of minor tweaks, it actually works on everyday versions of Linux
like Debian.
Problem is, its missing the simulation and verfication tools shipped with
the Windows version. I'm namely thinking about ModelSim, and the version
that is downloadable from the Xilinx WebPack homepage - what are people
doing on Linux for (Free) simulation and verification?
Cheers
Tim
--
"Linux... because rebooting is for adding new hardware!"
http://home.swiftdsl.com.au/~tmccoy
MSN: timsy_01@hotmail.com
ICQ: 160341067