Hi everyone,


I have been trying to get a good behavioral simulation going of a
Virtex2 on the ML310 board. I'm trying to simulate a standard generated

chip architecture with DSOCM & ISOCM running the standard generated
test-program.


As far as I know there are two ways to go (with the software I have):


1) directly from XPS
2) via ProjectNavigator


The problem with 1) is that the simulated chip "hangs", it does not run

any program, and all the core reset signals go high, and never come
down... (I provide stimuli to the pin_clk and pin_rst)


The problem with 2) is that I can't even get a proper simulation to
work, when I run the sim from XPN, it tells me that the components
aren't bound, resulting in Undefined signals everywhere but the RST and

VCC.


I am new to these kind of large scale VHDL environments, so any help
would be appreciated. 


Jim Tuilman