>ylc199 wrote:
>> Hi
>>
>> I have a Stratix EP1S80 DSP development board. However, i am not able
to
>> get the ADC or the DAC devices on the board to work. What i am trying
to
>> do is simply send an analog waveform (eg 1 khz sine wave) into the adc
and
>> then try to recover the waveform with the DAC. Can anyone please
kindly
>> advice on this or even better if anyone have a design example that can
>> email me? Thanks
>
>I remember a colleague having had his problems too.
>The local Altera distributor was of a great help
>on the phone.
>
>Rene
>--
>Ing.Buero R.Tschaggelar - http://www.ibrtses.com
>& commercial newsgroups - http://www.talkto.net
>
It has been a week and the local altera distributor hasn't reply. Still
with a some luck i finally got it to work; problem solved. Thanks
Reply by Rene Tschaggelar●December 7, 20052005-12-07
ylc199 wrote:
> Hi
>
> I have a Stratix EP1S80 DSP development board. However, i am not able to
> get the ADC or the DAC devices on the board to work. What i am trying to
> do is simply send an analog waveform (eg 1 khz sine wave) into the adc and
> then try to recover the waveform with the DAC. Can anyone please kindly
> advice on this or even better if anyone have a design example that can
> email me? Thanks
I remember a colleague having had his problems too.
The local Altera distributor was of a great help
on the phone.
Rene
--
Ing.Buero R.Tschaggelar - http://www.ibrtses.com
& commercial newsgroups - http://www.talkto.net
Reply by ylc199●December 7, 20052005-12-07
Hi
I have a Stratix EP1S80 DSP development board. However, i am not able to
get the ADC or the DAC devices on the board to work. What i am trying to
do is simply send an analog waveform (eg 1 khz sine wave) into the adc and
then try to recover the waveform with the DAC. Can anyone please kindly
advice on this or even better if anyone have a design example that can
email me? Thanks
regards
ylc199