"Paul Marciano" <pm940@yahoo.com> schrieb im Newsbeitrag
news:1135968968.926661.91100@z14g2000cwz.googlegroups.com...
> Hi,
>
> I am trying to use the ADSU8 library element in ISE7.1i. The libraries
> guide says its inferred by HDL (Verilog in my case) but does not give
> an example.
>
> I can create it with the schematic editor but not with Verilog.
>
> I have tried to express the unit in a number of different ways. Rather
> than embarrass myself by posting bad code, I'll just ask the question -
> is there a trick to it?
>
> Thanks,
> Paul.
>
Hi Paul,
there are tricks and 'need to know' things all around.
I am using ISE schematic as kinda coregen, inserting a single component onto
empty schematic and then looking at functional code of it and copying over
the stuff into vhdl or verilog. that way I get allways things done.
--
Antti Lukats
http://www.xilant.com
Reply by Paul Marciano●December 30, 20052005-12-30
Hi,
I am trying to use the ADSU8 library element in ISE7.1i. The libraries
guide says its inferred by HDL (Verilog in my case) but does not give
an example.
I can create it with the schematic editor but not with Verilog.
I have tried to express the unit in a number of different ways. Rather
than embarrass myself by posting bad code, I'll just ask the question -
is there a trick to it?
Thanks,
Paul.