You don't need the DISPLAY :0 for ise project navigator and impact but
you still need it for almost all the other progz (PACE, FPGA editor,
FloorPlanner etc).
Mehdi
Reply by ●January 12, 20062006-01-12
Thomas Reinemann <Thomas.Reinemann@masch-bau.uni-magdeburg.de> writes:
> AFAIK, the Win32 version of the Webpack contains Modelsim.
No, it's a separate download.
> Does the Linux version contain it too?
The Xilinx edition is only available for Windows.
AFAIK Webpack includes ISE Simulator on both Windows and Linux.
Reply by Leon●January 12, 20062006-01-12
Modelsim has to be downloaded and licensed seperately.
Leon
Reply by Thomas Reinemann●January 12, 20062006-01-12
Christopher Cole schrieb:
> I like the new Xilinx Webpack 8.1i interface under Linux, it works great.
> I am running the Webpack under Gentoo Linux with a 2.6.14 kernel.
AFAIK, the Win32 version of the Webpack contains Modelsim. Does the
Linux version contain it too?
Bye Tom
Reply by Uwe Bonnes●January 10, 20062006-01-10
Christopher Cole <cole@scoob.coledd.com> wrote:
> I like the new Xilinx Webpack 8.1i interface under Linux, it works great.
> I am running the Webpack under Gentoo Linux with a 2.6.14 kernel. The
> Impact tool works well with the parallel port under Linux. I updated the
> Gentoo HOWTO-Xilinx at:
> with the steps that I took to get everything installed and working properly,
> including the kernel modules needed to get the parallel port JTAG working.
On Suse 10.0 with Kernel 2.6.13-15.7-default, Windriver
WD700.tgz didn't compile. Insight UK offers a free download for WD702 after
registration:
http://shop.directinsight.co.uk/catalog/product_info.php?products_id=722
udev is active on my Suse machine, I didn't have to disable it for windriver
to compile, so perhaps with 702 your FAQ needs to be revised with regards to
udev.
I hope XILINX will use ppdev for parallel port access sometimes, like
libusb could be used for the USB access. This windriver things is a constant
source of trouble...
I didn't had to change the DISPLAY variable as I had before up to 7.1. Is
setting $DISPLAY to :0 still needed on your setup?
Bye
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
Reply by Christopher Cole●January 10, 20062006-01-10
I like the new Xilinx Webpack 8.1i interface under Linux, it works great.
I am running the Webpack under Gentoo Linux with a 2.6.14 kernel. The
Impact tool works well with the parallel port under Linux. I updated the
Gentoo HOWTO-Xilinx at:
http://gentoo-wiki.com/HOWTO_Xilinx
with the steps that I took to get everything installed and working properly,
including the kernel modules needed to get the parallel port JTAG working.
Take care,
-Chris
--
/> Christopher Cole <\ <\
<< Cole Design and Development \\ email: cole@coledd.com \\
\\ Computer Networking & Embedded Electronics \\ web: http://coledd.com >>
\> \> </