> Last time I checked there was MIG available for ISE8.1,
> so this only works for the CORE Generator included in ISE7.1.
Just checked again: There now is MIG 1.5 for ISE8.1 available.
cu,
Sean
Reply by Sean Durkin●March 2, 20062006-03-02
Brad Smallridge wrote:
> XAPP709 states that a 200-MHz DDR SDRAM can be built using MIG coregen,
> however, when I run mig006_rel6 ISE7.1.04, I don't see V4s on the drop down
> selector. What's the story?
mig007_rel6 is not "MIG coregen".
The MIG you're looking for is included in CORE Generator, it's not a
standalone tool. You can install it via the online updates function in
CORE Generator. Last time I checked there was MIG available for ISE8.1,
so this only works for the CORE Generator included in ISE7.1.
cu,
Sean
Reply by Brad Smallridge●March 1, 20062006-03-01
XAPP709 states that a 200-MHz DDR SDRAM can be built using MIG coregen,
however, when I run mig006_rel6 ISE7.1.04, I don't see V4s on the drop down
selector. What's the story?
Brad